Dell Diagnostics - Dell Inspiron 0M41FVA00 Setup Manual

Dell desktop computer setup guide
Table of Contents

Advertisement

Dell Diagnostics

If you experience a problem with your
computer, perform the checks in "Lockups and
Software Problems" on page 36 and run the
Dell Diagnostics before you contact Dell for
technical assistance.
It is recommended that you print these
procedures before you begin.
NOTE: Dell Diagnostics works only on
Dell computers.
NOTE: The Drivers and Utilities disc may
not ship with your computer.
See the System Setup section in the Service
Manual to review your computer's configuration
information, and ensure that the device that
you want to test displays in the system setup
program and is active.
Start the Dell Diagnostics from your hard drive
or from the Drivers and Utilities disc.
Starting Dell Diagnostics From Your
Hard Drive
The Dell Diagnostics is located on a hidden
diagnostic utility partition on your hard drive.
NOTE: If your computer cannot display
a screen image, contact Dell (see
"Contacting Dell" on page 63).
1.
Ensure that the computer is connected to an
electrical outlet that is known to be working
properly.
2.
Turn on (or restart) your computer.
3.
When the DELL
logo appears, press <F12>
immediately. Select Diagnostics from the
boot menu and press <Enter>.
This may invoke the Pre‑Boot System
Assessment (PSA) on your computer.
Using Support Tools
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents