STARFAVOR SPT-500 Installation Manual

SPT-500 Height Adiustable Piano Stand
Installation Manual
● Please read the following instruction carefully and use the product accordingly.
● Please keep this manual and hand it over when you transfer the product.
● This summary may not include every detail of all variations and considered steps.
● Please contact us when further information and help are needed.
● During assembly , keep parts and packaging materials away from children and pets
● Avoid sharp objects or corrosive chemicals to prevent damage to the product.
● Please open the item slowly and cautiously to avoid pinching your hands by metal
● Please follow the assembly instructions precisely and only use the product as intended.
● If an odor is present when first opening the package, please leave the unwrapped
● Prior to assembly, please check the product for defects or missing accessories.If any
● During assembly, please only slightly tighten all screws in their correct position first, then
● It is suggested you regularly check the products bolts and connections to ensure safe use.
● Assemble the item on a soft flat and clean surface to avoid scratches and damage.
● It is recommended that two people assemble this produc
IMPORTANT INFORMATION
READ CAREFULLY.
KEEP THIS INFORMATION FOR FURTHER REFERENCE.
GENERAL GUIDELINES
WARNINGS
as there could cause injury and are a potential choking hazard.
joints, especially children.
NOTES
product in a shaded and ventilated area for a few days to air out.
defects are found or accessories are missing, do not use product as damage or injury
may occur; Please contact us for assistance and replacement.
fully tighten them. A Philips screwdriver is recommended but not included.
1
EXPLODED DRAWING:
PARTS:
A
M6*50
E
M6
Please check you have all hardware before assembling.
Please ensure you have the name of the item and hardware part required and quantity.
Please contact us by mail, if you have any questions, and we will reply you ASAP.
Enjoy your new purchase!
M
M2
2
6
5
6
10
7
9
4
8
1
2
3
3
D
x 4 B x 8 C x 4 x 5
M6*30 M6*20 M6*16
H
x 4 F x 2 G x 1 x 1
M4
J J L
x 4 x 4 x 4
x 1
3
I
1. G I
I
I
B
3
G
H
1
2
G I 4 H X 1
B x 8 x 1 X
M6*30 M4
REMARK:
1 3
1.Repeat steps 1 and 2 to complete the installation of and
2.Replace I with according to your needs.
4