Table of Contents
Advertisement
Quick Links
INVERTER GENERATOR
User's Manual
WARNING: SAVE THIS MANUAL FOR FUTURE REFERENCE
This manual contains important information regarding safety. Operation,
maintenance and storage of this product. Before use, read carefully and
understand all cautions, warnings, instructions and product labels. Failure to
do so could result in serious personal injury and/or property damage.
Advertisement
Table of Contents
Summary of Contents for ULTIMATRON FRANCE 148F/P-2
- Page 1 INVERTER GENERATOR User's Manual WARNING: SAVE THIS MANUAL FOR FUTURE REFERENCE This manual contains important information regarding safety. Operation, maintenance and storage of this product. Before use, read carefully and understand all cautions, warnings, instructions and product labels. Failure to do so could result in serious personal injury and/or property damage.
-
Page 2: Table Of Contents
Thank you very much for choosing generator set product manufactured by our Company! This Manual will instruct you how to operate and use the generator set safely and properly. Please be sure to read it carefully before using. All technical data and diagrammatic presentations in this User’s Manual are consistent with the latest product at the time of publication. -
Page 3: Safety
SAFETY ● Keep fuel away from sparks, open flames, Personal and property safeties of you and heat, and other ignition sources. others are very vital. Please read the Safety ● Check fuel lines, tank, cap, and fittings Warning in the User's Manual and the decals frequently for cracks or leaks;... - Page 4 SAFETY Before operating the generator, it will help you avoid accidents to read and understand the Manual and familiarize yourself with the safe operation procedures of the generator. Please do not use in humid Please do not use indoors environment Do not directly connect to the Please do not smoke when household power supply system...
-
Page 5: Names Of Components
NAMES OF COMPONENTS Lifting Handle Fuel Tank Cap Left Exterior Cover Plate Control Panel Multi-Switch Startup Handle Spark Plug Maintenance Cover Side Shield of Muffler Right Exterior Cover Plate Muffler STATEMENT: The illustrations used in this manual are intended as representative reference views only... -
Page 6: Control Functions
CONTROL FUNCTIONS Multi-Switch Overload Indicator (red) OFF - Ignition circuit is off, the fuel valve is closed, the engine will not run. RUN - Ignition circuit is on, the fuel valve is open, the choke is open, and the engine runs normally. - Page 7 CONTROL FUNCTIONS AC Circuit Breaker 1) "ON” If the total AC load exceeds the rated current, When energy saving switch is switched to the AC circuit breaker will open (trip) and the "ON" position engine speed is reduced when button will pop out. In this case disconnect all the generator is under light load.
-
Page 8: Preparations
PREPARATIONS Add Gasoline Loosen the bolt and remove the right exterior cover plate; DANGER ● Fuel is flammable and toxic, please read the Safety Instruction carefully before refueling; ● Do not fuel too full, otherwise fuel will spill after fuel tank is warmed; ●... -
Page 9: Pre-Use Inspection
PREPARATIONS 6. After refueling, tighten the oil dipstick, wipe Tip: The condition of the generator shall off the surrounding oil, and reassemble the be inspected before using every time. exterior cover plate. Pre-Operation Inspection ATTENTION Fuel Your generator was functionally tested in the factory and may contain minimum residual oil. -
Page 10: Operation
OPERATION Starting up the Generator Generator Location WARNING 1. Make sure the generator is on a solid, flat, level surface. NEVER operate the generator inside any building, garage, basement, crawlspace, 2. Disconnect all electrical loads from the shed, or enclosure, including the generator generator. - Page 11 OPERATION ATTENTION For gasoline starting in standard ambient temperature >59°F(15°C): Keep Multi- Switch in "CHOKE”position for three pulls of the recoil cord. If generator does not start after three pulls, rotate the Multi-Switch to the “RUN” position for the next three pulls. Too much choke leads to spark plug fouling and engine flooding.
-
Page 12: Shutting Down The Generator
OPERATION Shutting Down the Generator If the OVERLOAD light turns on and the generator stops producing power, it has been overloaded. 1. Turn off and unplug all connected electrical loads. Never start or stop the Turn off and disconnect all electrical generator with electrical devices plugged devices and stop the engine. -
Page 13: Using The Generator
USING THE GENERATOR Service Environment of the ● Avoid connecting this generator to commercial power outlet. Generator ● When extending the cable, be sure not to ● Applicable temperature: 23℉(-5℃ )~ exceed its length. 104℉(40℃); ① 60m cross-section area is 1 .5mm² ●... -
Page 14: Range Of Application
USING THE GENERATOR Connection of AC power Generator Grounding WARNING Ail electrical equipment In order to prevent any damage to the shall be disconnected before inserting the generator caused by electric shock or plug. improper electrical application, it is recommended that the generator is grounded ATTENTION with good conductor with insulating sheath. -
Page 15: Service And Maintenance
SERVICE AND MAINTENANCE Good maintenance and service is the best guarantee for safe, economical and reliable operation. It also contributes to environmental protection. In order to keep the generator in good condition, you must inspect and maintain it regularly. The maintenance schedule is as follows: Then every three Maintenance cycle 100 hours per... -
Page 16: Spark Plug Inspection
SERVICE AND MAINTENANCE ATTENTION ● If it often works under high temperature or Spark Plug Cap high load, oil shall be changed every 25 hours; Spark Plug ● If it often works in dusty or harsh Spark Plug Maintenance environment, air cleaner element shall be Cover cleaned every 10 hours. - Page 17 SERVICE AND MAINTENANCE Tip: If there is no torque wrench when installing the spark plug, a better estimation method is to screw it 1/4-1/2 turns by force after screwing it in place, but the spark plug shall be screwed to specified torque as soon as possible.
-
Page 18: Air Filter
SERVICE AND MAINTENANCE 4. Clean the components with cleaning Safe operating range agent. After cleaning, wrap the components in a cloth and screw them dry. 6. After refueling, tighten the oil dipstick, wipe off the surrounding oil, and reassemble the exterior cover plate. -
Page 19: Spark Arrestor Maintenance
SERVICE AND MAINTENANCE Fuel Filter Screen ATTENTION Be sure not to start the engine before air WARNING cleaner is assembled, because ti will Be sure not to open fuel tank of the generator generate excessive toxic gas and wear the in a place where smoking or with flame. -
Page 20: Storage And Transport
STORAGE AND TRANSPORT Generator Storage 5. Unscrew oil dipstick, and drain oil in the crankcase off. Fill new oil to upper oil limit, If it is stored long-term, in order to prevent and then assemble oil dipstick. aging, you shall take some storage measures. -
Page 21: Troubleshooting
TROUBLESHOOTING... - Page 22 TROUBLESHOOTING...
-
Page 23: Technical Parameters
TECHNICAL PARAMETERS 148F/P-2 164F/P-2 Engine Model Single Cylinder, Four Stroke, Air Cooled, Overhead Valve Engine Type 48.6×43 64×45 Cylinder Diameter×Stroke (mm) 79.7 Displacement(cc) 8.7±0.2 8.7±0.2 Compression Ratio Gas Distribution Mode Forced Cold Air Forced Cold Air Cooling Mode Output Power(kW/r/min ) 2.4/5000...
Need help?
Do you have a question about the 148F/P-2 and is the answer not in the manual?
Questions and answers