Related Manuals for AREBOS AR-HE-FMSS/B
Summary of Contents for AREBOS AR-HE-FMSS/B
- Page 1 Original User Manual – A S Bicycle Repair Stand REBO Bicycle Repair Stand AR-HE-FMSS/B Please follow all security measures in this user´s manual to ensure a secure use. Thank you for trusting in AREBOS.
-
Page 2: Table Of Contents
Original User Manual – A S Bicycle Repair Stand REBO Table of Contents 1 Safety instructions ......3 1.1 Explanation of the symbols ......................3 1.2 Intended Use ..........................3 1.3 General safety instructions ......................3 2. Delivery Content and Technical Data .. 5 2.1 Delivery Content .......................... -
Page 3: Safety Instructions
Original User Manual – A S Bicycle Repair Stand REBO Thank you for purchasing our product. Please read the operating instructions carefully before using the product for the first time. If you give the product to a third party, this manual must be handed over with it. - Page 4 Original User Manual – A S Bicycle Repair Stand REBO • Ensure the socket screws on the upper tube connector are always secure. • WARNING! Set up the product on a stable, flat surface to prevent it from toppling over. •...
-
Page 5: Delivery Content And Technical Data
Original User Manual – A S Bicycle Repair Stand REBO 2. Delivery Content and Technical Data 2.1 Delivery Content 1 x stand with support feet (1) 1 x tool tray (6) 1 x bicycle mount (2) 1 x clamp for tool tray (7) 1 x telescopic rod (3) 2 x screw set (8) 1 x front wheel stabilizer (4) -
Page 6: Assembly
Original User Manual – A S Bicycle Repair Stand REBO 2 Assembly... -
Page 7: Prepare The Stand
Original User Manual – A S Bicycle Repair Stand REBO Prepare the Stand NOTE: Ensure that there is sufficient space around you during the assembly process to prevent any accidental bumps. The stand has extended legs for enhanced stability. 1) Open the lower release clamp (1a) on the stand (1) and unscrew it by approximately two turns. -
Page 8: Attach The Tool Tray
Original User Manual – A S Bicycle Repair Stand REBO • Turn the fixing screw (3a) until the bicycle mount is securely positioned in the bracket of the telescopic rod. Attach the Tool Tray • Position the bracket (7) anywhere on the stand (1) and opposite the tool tray (6). •... -
Page 9: Mounting The Bicycle
Original User Manual – A S Bicycle Repair Stand REBO 3. Mounting the bicycle Tips: • After mounting the bicycle, check that both the bicycle and the repair stand are securely in position. • Adhere to the maximum extension lengths of the telescopic rod (3) and the bicycle mount (2) without exceeding the indicated markings (2c)/(3b) (see fig. -
Page 10: Adjusting The Telescopic Rod
Original User Manual – A S Bicycle Repair Stand REBO Adjusting the Telescopic Rod • If the quick release lever (2a) can be flipped too easily, the clamping force is insufficient. Follow these steps to adjust the clamping force: • The telescopic rod can be set at any desired height. -
Page 11: Maintenance And Care
Our customer service number: Tel. +49 931 90 80 3000 E-Mail: info@arebos.de Office address: Canbolat Vertriebs GmbH • Gneisenaustraße 10-11 • 97074 Würzburg Return address can be found in the imprint: https://www.arebos.de/impressum/... -
Page 12: Imprint
Authorised representative for the technical documentation: Korhan Canbolat Office address: Canbolat Vertriebs GmbH Gneisenaustraße 10-11 D-97074 Würzburg Return address can be found in the imprint: https://www.arebos.de/impressum/ VAT identification number: DE 263752326 Court of the Commercial Register is Würzburg, HRB 10082 WEEE Reg.-No. DE 61617071...
Need help?
Do you have a question about the AR-HE-FMSS/B and is the answer not in the manual?
Questions and answers