Champion Power Equipment 201495 Operator's Manual
  1. Manuals
  2. Brands
  3. Champion Power Equipment Manuals
  4. Construction Equipment
  5. 201495
  6. Operator's manual
Champion Power Equipment 201495 Operator's Manual

Champion Power Equipment 201495 Operator's Manual

8.8 cu. ft., 79 cc concrete mixer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
MODEL #201495
8.8 cU. fT., 79 cc cONcRETE MIXER
ACTIVATE YOUR WARRANTY
SERIAL NO.
by registering your product:
championpowerequipment.com
or visit championpowerequipment.com
SAVE THESE INSTRUcTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do
so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
EN
5519-M-OP
REV 20250123
Champion Power Equipment, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 201495 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Champion Power Equipment 201495

Summary of Contents for Champion Power Equipment 201495

  • Page 1 This manual should remain with the product. Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice. 5519-M-OP REV 20250123 Champion Power Equipment, Inc.

  • Page 2: Table Of Contents

    TAbLE Of cONTENTS 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER TAbLE Of cONTENTS Maintenance ..........Cleaning the Mixer ..

  • Page 3: Introduction

    INTRODUcTION 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER SAfETY DEfINITIONS INTRODUcTION Congratulations on your purchase of a Champion Power Equipment The purpose of safety symbols is to attract your attention to (CPE) product. CPE designs, builds, and supports all of our possible dangers.

  • Page 4: Important Safety Instructions

    IMPORTANT SAfETY INSTRUcTIONS 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER IMPORTANT SAfETY INSTRUcTIONS DANGER  Rotating parts can entangle hands, feet, hair, clothing and/or WARNING  accessories. Traumatic amputation or severe laceration can Cancer and Reproductive Harm – www.P65Warnings.ca.gov result.

  • Page 5: Fuel Safety

    IMPORTANT SAfETY INSTRUcTIONS 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER WARNING WARNING   – Always clear the work area before each use. Remove all Sparks can result in fire or electrical shock. objects such as rocks, broken glass, nails, wire, or string When servicing the engine: which can be thrown or become entangled in the machine.
  • Page 6 IMPORTANT SAfETY INSTRUcTIONS 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER – Gasoline has a distinctive odor, this will help detect potential WARNING  leaks quickly. When transporting or servicing the concrete mixer: – In any petroleum gas fire, flames should not be extinguished unless by doing so the fuel supply valve can be turned OFF.

  • Page 7: Safety And Dataplate Labels

    AVERTISSEMENT NE TOUCHEZ PAS! This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for Surface chaude. outside parties without the explicit consent of Champion Power Equipment.
  • Page 8 3mm corner radius; 2mm safe margin This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for outside parties without the explicit consent of Champion Power Equipment.

  • Page 9: Safety Symbols

    IMPORTANT SAfETY INSTRUcTIONS 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER Safety Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.
  • Page 10 IMPORTANT SAfETY INSTRUcTIONS 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER MEANING SYMBOL Toxic Fumes. The engine exhaust from this product contains chemicals known to the state of California to cause cancer and birth defects and other reproductive harm.

  • Page 11: Operation Symbols

    WHITE substrate. 1. Check oil level. This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for outside parties without the explicit consent of Champion Power Equipment.

  • Page 12: Controls And Features

    AND fEATURES 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER cONTROLS AND fEATURES Read this operator’s manual before operating your concrete mixer. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference.

  • Page 13: Engine

    AND fEATURES 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER Engine 1. Muffler 6. Engine On / Off Switch 2. Choke 7. Oil Drain Bolt (on each side) 3. Air Filter 8. Engine Oil Fill Cap / Dipstick (on each side) 4.

  • Page 14: Accessories

    AND fEATURES 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER Accessories Tools Needed Engine Oil [10W-30: 13.5 fl. oz. (400 ml)] ......– Metric Wrench and Socket Set Engine Oil Funnel ...........

  • Page 15: Parts Included

    AND fEATURES 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER Parts Included Part Hardware Torque Part Part Reference Hardware Needed Tool Needed Qty. Qty. (N.m) Bolt M8 × 70 1× 14mm wrench or socket Nut M8 1× 14mm wrench...

  • Page 16: Assembly

    ASSEMbLY 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER ASSEMbLY Assemble the Support Leg to the U-frame 1. With the assembly resting on the wheel bracket and U-frame NOTIcE  as shown, slide the support leg (C) over the corner of the U-frame (A) and align the bolt holes.

  • Page 17: Assemble The Bottom Drum Half To The U-Frame

    ASSEMbLY 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER Assemble the bottom Drum Half to the Assemble the Drum Tipping Wheel U-frame NOTIcE  NOTIcE  This assembly requires 2 people. This assembly requires 2 people. 1. From the support leg side, insert a M8 x 20 hex bolt through each hole on the mounting bracket (1).

  • Page 18: Assemble The Top Half Of The Drum To The

    ASSEMbLY 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER 5. Using a 10mm socket and wrench, securely tighten the lock 2. The hardware for this step (flange nuts and bolts) are nut and bolt. assembled to the bottom drum half. Using a 12mm socket or wrench, remove each flange nut and bolt from the bottom 6.

  • Page 19: Assemble The Engine

    ASSEMbLY 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER 2. From the outside of the drum, insert two (2) flat head, 2. Spin the drum until the foam tape on the drum gear teeth M12 x 25 bolts through the holes in the drum, then place a engage with the engine shaft gear holding the drum in place.

  • Page 20: Add Engine Oil

    ASSEMbLY 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER 7. Using a 14mm socket and wrench, securely tighten the nut NOTIcE  and bolt. Check oil often during the break-in period. Refer to the Maintenance section for recommended service intervals.

  • Page 21: Add Fuel

    ASSEMbLY 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER Add fuel 3. Once all screws are loose, slide the panel upward and pull outward slightly. Allow the panel to drop and hang by the bottom left screw. WARNING ...

  • Page 22: Operation

    OPERATION 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER OPERATION 3. Open the engine box cover. WARNING  ALWAYS use the mixer for its intended use. The mixer should only be used to mix and prepare mortar and concrete.

  • Page 23: Loading And Mixing Positions

    OPERATION 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER To lock the drum in position, release the foot lever when rotating 3. Move the choke lever to the “CHOKE” position. the drum. The locking bar will slide into the nearest lug on the tilt wheel and lock into place.

  • Page 24: Stopping The Engine

    MAINTENANcE 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER Loading the Mixer 7. As the engine warms up, move the choke lever to the “RUN” position. NOTIcE  Always start the engine before you start loading the drum. The mixer blades should be turning before you start adding the contents.
  • Page 25 MAINTENANcE 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER For service or parts assistance, contact our 2. Using a Philips head screwdriver, loosen the 4 screws on the Technical Support Team at 1-877-338-0999. oil fill access panel. 3. Once all screws are loose, slide the panel upward and pull cleaning the Mixer outward slightly.

  • Page 26: Maintenance Schedule

    STORAGE 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER 3. Inspect the electrode on the plug. It must be clean and not 7. Reattach the filter cover by inserting the tabs on the side worn to produce the spark required for ignition.

  • Page 27: Engine Stored For Less Than 30 Days

    STORAGE 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER WARNING  Never store the concrete mixer indoors next to appliances where there is a source of heat or open flame, spark or pilot light because they can ignite gasoline vapors. Even with an empty gas tank, gasoline vapors could ignite.

  • Page 28: Specifications

    SPEcIfIcATIONS 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER SPEcIfIcATIONS fuel Specifications Use unleaded gasoline with a minimum octane rating of 87 and concrete Mixer Specifications an ethanol content of 10% or less by volume. DO NOT USE E15 or E85.

  • Page 29: Troubleshooting

    TROUbLESHOOTING 201495 - 8.8 cU. fT., 79 cc cONcRETE MIXER TROUbLESHOOTING Problem Cause Solution No fuel. Add fuel. Engine will not start. Faulty spark plug. Replace spark plug. Unit loaded during start up. Remove load from unit. Fill crankcase to the proper level.

  • Page 30: Warranty

    Consequential Damage Repair/Replacement Warranty Champion Power Equipment disclaims any obligation to cover any loss of time, use of this product, freight, or any incidental CPE warrants to the original purchaser that the mechanical and or consequential claim by anyone from using this product.

  • Page 31: Your Warranty Rights And Obligations

    AND THE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY (U.S. EPA) EMISSION CONTROL SYSTEM WARRANTY Your Champion Power Equipment (CPE) engine complies with U.S. EPA emissions regulations. YOUR WARRANTY RIGHTS AND OBLIGATIONS: The US EPA and CPE are pleased to explain the Federal Emission Control Systems Warranty on your 2025 small off-road engine and engine powered equipment.

  • Page 32: Emission Control System Warranty

    EMISSION CONTROL SYSTEM WARRANTY The following are specific provisions relative to your Emission Control System (ECS) Warranty Coverage. 1. APPLICABILITY: This warranty shall apply to 1997 and later model year small off-road engines. The ECS Warranty Period shall begin on the date the new engine or equipment is delivered to its original, end-use purchaser, and shall continue for 24 consecutive months thereafter.

  • Page 33: To Obtain Warranty Service

    You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours.

Table of Contents