Advertisement
Advertisement
Table of Contents
Related Manuals for Cair Detect
Summary of Contents for Cair Detect
- Page 1 Smart Technology, Made to Care Detect Quick Reference Guide we-cair.com...
-
Page 2: Table Of Contents
Contents ● Page 3 - How it Works/Positioning ● Page 4 - Switching On/Off ● Page 5 - Programming the Modes/Options ● Page 6 - Modes/Options Page 7 - Absence Delay ● ● Page 8 - Registering to a Notifier / Other System Smart Technology, Made to Care... -
Page 3: How It Works/Positioning
Absence Delay expires. When in normal use, the Detect should be positioned safely on the floor below or behind the bed/chair, or it can be fixed in position using suitable strapping, cable ties etc. -
Page 4: Switching On/Off
Detect Switching On / Off To switch on, press and hold the external switch. The LED Indicator will flash red & green and then produce a high-pitched tone followed by a brief green colour flash which confirms it is on. Now release the switch. -
Page 5: Programming The Modes/Options
Detect Programming the Modes / Options To program the modes/options (which can be found on the next page), use the following method: ● Turn the dial to the desired setting ● Press and hold the internal switch using a suitable instrument until LED 2 changes colour and a sound is heard (approx 2 seconds) ●... -
Page 6: Modes/Options
Detect Modes/Options No.1. Mode 1. Inputs 1 & 2 will transmit the same identity. Both inputs will ‘work ● together’ (Default) No.2. Mode 2. Inputs 1 & 2 will transmit different identities. Both inputs will ‘work ● together’ ● No.3. Mode 3. Inputs 1 & 2 will transmit the same identity. Both inputs will work independently of each other ●... -
Page 7: Absence Delay
Detect Absence Delay Once the modes/options have been programmed, simply turn the dial to the desired number which matches the delay time required. There is no need to press and hold the internal switch afterwards. The absence delay options are: ●... -
Page 8: Registering To A Notifier / Other System
The Notifier/other system should acknowledge the new device. ● If using Modes 2 or 4, repeat steps 1-5 and activate the Detect using the pad connected to Input 2. Note: If using an Enuresis mat, it must be connected to Input 1. -
Page 9: Smart Technology, Made To Care
Thank you Smart Technology, www.we-cair.com Made to Care 01422 399155 hello@we-cair.com...
Need help?
Do you have a question about the Detect and is the answer not in the manual?
Questions and answers