RECORDING MODE
FLASH MODES
Data
EVF &
panel
LCD monitor
–
–
The flash mode can be changed in the basic section of the recording-mode menu (p.
80). For the flash to fire, the unit must be manually lifted. The flash will fire in the
selected mode regardless of the amount of ambient light. When the flash is used, the
camera sensitivity is automatically set at ISO 200. This setting can be changed using
the function dial (p. 40). The auto-white-balance setting will give priority to the flashes
colour temperature. If manual white-balance settings are used, priority is given to the
active settings colour temperature (p. 59).
FILL FLASH
Fill-flash can be used as the main or
supplementary light. In low-light
conditions, the flash will act as the
main source of illumination and
overpower the ambient light. Under
strong sunlight or in backlit situations,
the fill-flash can reduce harsh
shadows.
76
Used in low-light conditions and to
Fill-flash
reduce shadows under direct sunlight.
Red-eye
To reduce the red-eye effect with flash
reduction
photographs of people and animals
Rear flash
Flash fires at the end of long exposures.
sync