Advertisement
Quick Links
EHWTTOP6 – Hot Wire Cutting Table
EHWTTOP6 Hot Wire Cutting Table is ideal for cutting EPS, XPS and other types of foam
into various shapes for ornamental use. It quickly and efficiently makes vertical, angled,
cylindrical and conical cuts. It is extremely portable and versatile when projects require
small pieces and aesthetic shapes.
•
Please read these instructions carefully before operation
•
Take special note of the guidelines and safety prompts in these instructions to avoid
injury to yourself, other people and objects, or damage to the tool.
1-844-TT-TOOLS
www.tapetech.com
User Manual
1327 Northbrook Parkway, Suite 400
TapeTech Tools
Suwanee, GA 30024
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TapeTech EHWTTOP6
Summary of Contents for TapeTech EHWTTOP6
- Page 1 EHWTTOP6 – Hot Wire Cutting Table User Manual EHWTTOP6 Hot Wire Cutting Table is ideal for cutting EPS, XPS and other types of foam into various shapes for ornamental use. It quickly and efficiently makes vertical, angled, cylindrical and conical cuts. It is extremely portable and versatile when projects require small pieces and aesthetic shapes.
-
Page 2: Product Overview
Product Overview: 1. Tabletop 2. Side Panel 9. Hot Wire Roll Tightening Knob 3. Power Switch and Power Assembly 10. Conductive Groove 4. Connecting Cantilever Conductive Nut 11. Hot Wire 5. Overhead Arm Adjustment Knob 12. Hollow bolt 6. Power Adapter 13. - Page 3 Cutting Foam Shapes with EHWTTOP6 Straight Cuts To make straight cuts in foam, set the wire angle adjustment on the overhead arm to 0 Adjust the cutting guide to the desired measurement and tighten the knobs. Turn on the power to the hot wire and move the foam through the wire at a consistent speed.
- Page 4 Circular and Cylindrical Cuts Circles and Cylinders can be cut using the circle cutting attachment. First, set the angle adjustment to . Adjust the cutting guide to the desired measurement and tighten the knobs. Mount the foam on the circle cutting adapter. Move the foam into the wire and then rotate the foam 360 .
- Page 5 1) After turning off the power, check if the Conductive Nut (Part 4) in the middle of the side panel is loose. 2) Check whether the hot wire has moved out of position. TapeTech Tools 1-844-TT-TOOLS 1327 Northbrook Parkway, Suite 400 Suwanee, GA 30024 www.tapetech.com...
Need help?
Do you have a question about the EHWTTOP6 and is the answer not in the manual?
Questions and answers