Download Print this page

NENKO 21967010 Manual

Sensory wagon with led screen

Advertisement

Quick Links

1. Product name
Sensory Wagon with LED screen
2. Product code
21967010
3. Colour
As shown
4. Description
This Snoezel Cart with LED screen is delivered in a wooden transport crate for safety and service
reasons.
5. Sensory stimulation
Touch, smell, hearing and sight
6. Use
1. You will receive the Snoezel Cart in a wooden crate, as shown below.
2. The crate is assembled with screws. Unscrew the front wooden panel and then drive or lift the
Snoezel Cart out with two people, due to its weight and to prevent damage.
3. Then, remove the protective film from the plexiglass of the screen.
4. Detach the key and open the door.
5. Do the same for the back. The key is fastened with a tie-wrap in the door opening (handle). In a
materials cart, the key is placed on top of the cart (44502010).
6. Tilt the back section slightly upwards using the footrest, making it easier to drive in and out.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 21967010 and is the answer not in the manual?

Questions and answers

Summary of Contents for NENKO 21967010

  • Page 1 1. Product name Sensory Wagon with LED screen 2. Product code 21967010 3. Colour As shown 4. Description This Snoezel Cart with LED screen is delivered in a wooden transport crate for safety and service reasons. 5. Sensory stimulation Touch, smell, hearing and sight 6.
  • Page 2 7. Now fill the bubble tube with water. Be careful not to overfill the tube, and avoid spilling water outside the tube to prevent damage to electronic components. See further instructions for bubble tubes on our website. Attention! Do not connect the Snoezel Cart if it is not filled with water! 8.
  • Page 3 7. Specifications Dimensions: 65 x 60 x 147 cm Power Supply: 220 V For more information, visit our website www.nenko.com...