Subscribe to Our Youtube Channel
Related Manuals for syscomtec crossxio SCT-IPE5100
Summary of Contents for syscomtec crossxio SCT-IPE5100
- Page 1 SCT-IPE5100 HDMI 2.0/USB AV over IP Encoder User Manual All Rights Reserved Version: SCT-IPE5100_2025 V1.0.0...
- Page 2 HDMI 2.0/USB AV over IP Encoder Preface Read this user manual carefully before using the product. Pictures shown in this manual are for reference only. Different models and specifications are subject to real product. This manual is only for operation instruction, please contact the local distributor for maintenance assistance.
-
Page 3: Table Of Contents
HDMI 2.0/USB AV over IP Encoder Table of Contents 1. Introduction ....................2 1.1. Overview ....................2 1.2. Features ....................2 1.3. Package Contents ................3 1.4. Specifications ..................4 1.5. Panel Descriptions ................5 2. Installation ...................... 7 3. Typical Applications..................8 3.1. -
Page 4: Introduction
HDMI 2.0/USB AV over IP Encoder 1. Introduction 1.1. Overview The SCT-IPE5100 series encoders are designed to work with SCT-IPD5100 series decoders for UHD media up to 3840 x 2160@60Hz 4:4:4 to be switched and distributed over standard Gigabit Ethernet networks, providing complete end-to-end streaming systems, where audio, video together with USB signals can be routed separately or as a whole. -
Page 5: Package Contents
HDMI 2.0/USB AV over IP Encoder Supports CEC. Supports multi-channel audio up to PCM 7.1, Dolby Atmos, DTS HD Master and DTS:X. Configurable audio input/output direction. HDMI ARC audio return. HDCP 2.2/2.3 compliant. Flexible routing policies, allowing audio, video and USB signals to be routed ... -
Page 6: Specifications
HDMI 2.0/USB AV over IP Encoder 1.4. Specifications Video Input Video Port 1 x USB-C; 1 x HDMI Type A (19 pins) Input Video Type HDMI 2.0, HDCP 2.2/2.3 3840 x 2160p@24/25/30/50/60Hz 4:4:4, 1920 x 1200@50/60Hz, 2400x1350p@60Hz, 1920 x 1080p@24/25/30/50/60/100/120Hz, 1920 x 1080i@50/60Hz, 1680 x 1050@60Hz, 1600 x 1200@60Hz, 1600 x 900@60Hz, 1400 x 1050@60Hz, 1440 x 900@60Hz,... -
Page 7: Panel Descriptions
HDMI 2.0/USB AV over IP Encoder USB Compliance: USB 3.0 (Local: USB 3.0, Remote: USB 2.0) Max USB Data Rate: 5Gbps USB-C Charging Compliance: PD 3.0 Max Charging Power: 100W Max Ethernet Data Rate: 1Gbps USB Compliance: USB 3.0 (Local: USB 3.0, Remote: ... - Page 8 HDMI 2.0/USB AV over IP Encoder Name Description Blinking: The device is connected to the network but doesn’t detect valid signal input. Blinking slowly: The device is being upgraded. Blinking quickly: Find me function is activated through Telnet/SSH/REST API for positioning a certain device.
-
Page 9: Installation
HDMI 2.0/USB AV over IP Encoder Name Description Note: **This configuration can be implemented through the IP controller (SCT-IPCX). For more information, refer to the controller’s Web UI configuration guide. IMPORTANT: To prevent network loop, do not connect both ports to the same network. -
Page 10: Typical Applications
HDMI 2.0/USB AV over IP Encoder 3. Typical Applications 3.1. Application 1 Ethernet Switch Amplifier Apple TV Encoder HDMI IN AUDIO OUT Decoder 3 x 3 Video Wall HDMI Set-top Box Encoder HDMI IN Serial Decoder 4K Media Player Encoder HDMI HDMI IN External Hard Drive... -
Page 11: Application 2
HDMI 2.0/USB AV over IP Encoder 3.2. Application 2 Ethernet Switch Apple TV Encoder HDMI 7.1 Surround Sound System Apple TV Encoder HDMI Decoder HDMI HDMI 4K Media Player HDMI Encoder External Hard Drive Camera Encoder Decoder HDMI HDMI AUDIO USB(PC) IP Controller Decoder... -
Page 12: Hardware Installation
HDMI 2.0/USB AV over IP Encoder In this application, LAN1 (POE+) port is for transmission of A/V streams and control data; LAN2 is for transmission of Dante audio streams which is routed to a standalone network. Two Ethernet ports are connected to different networks. 4. -
Page 13: Input Switching Mode
HDMI 2.0/USB AV over IP Encoder 6. Input Switching Mode The device provides three modes for input switching between USB-C IN and HDMI IN: Auto, Manual and Priority. Auto (1) In Auto mode, the input switching follows “Last In First Out” rule, i.e. the device always switches to the later input source and outputs it. -
Page 14: Control Of Devices
HDMI 2.0/USB AV over IP Encoder 7. Control of Devices The device can be controlled and configured by the IP controller, including routing of audio, video and USB signals, configurations of audio & video parameters, Dante features, firmware upgrade, etc. For more information, refer to the web configuration guide of the IP controller. -
Page 15: Customer Service
HDMI 2.0/USB AV over IP Encoder 8. Customer Service The return of a product to our Customer Service implies the full agreement of the terms and conditions hereinafter. There terms and conditions may be changed without prior notice. 8.1. Warranty The limited warranty period of the product is fixed three years. - Page 16 HDMI 2.0/USB AV over IP Encoder syscomtec Distribution AG Keltenring 11 D-82041 Oberhaching (bei München) Tel.: +49 89 666 109 330 Email: post@syscomtec.com https://www.syscomtec.com...
Need help?
Do you have a question about the crossxio SCT-IPE5100 and is the answer not in the manual?
Questions and answers