Table of Contents
Advertisement
Quick Links
Shadow Infnity 13.5kW and
18kW Industrial Inrared Heaters
Safety Instructions and Operation Manual
903693
903690
Shadow 13.5kW
Shadow 18kW
Unit 9, Stort Valley Industrial Estate
Stansted Road, Bishop's Stortford
Hertfordshire, United Kingdom
CM23 2TU
Available at
www.shadowindustrial.co.uk
01279 466500
ino@shadowindustrial.co.uk
Advertisement
Table of Contents
Related Manuals for Shadow Infnity 903693
Summary of Contents for Shadow Infnity 903693
- Page 1 Shadow Infnity 13.5kW and 18kW Industrial Inrared Heaters Safety Instructions and Operation Manual 903693 Shadow 13.5kW 903690 Shadow 18kW Unit 9, Stort Valley Industrial Estate Available at Stansted Road, Bishop’s Stortford www.shadowindustrial.co.uk Hertfordshire, United Kingdom 01279 466500 CM23 2TU ino@shadowindustrial.co.uk...
-
Page 2: Table Of Contents
Contents Important Information Safety Instructions Cleaning & Maintenance Assembly Instructions Wiring Diagram Technical Specications Table Customer Service Contents... -
Page 3: Brief Introduction
The Shadow Innity 13.5kW and 18kW Industrial Heaters can be mounted rom a wall or ceiling, or hung on chains and are designed or heating large-sized industrial spaces. -
Page 4: Safety Instructions
Safety Instructions Read these instructions beore using. WARNING Potential re risk i the heater is covered by any fammable materials. • CAUTION — Some parts of the heater can become very hot and cause burns Do NOT touch the appliance during operation to avoid the risk o injury. •... -
Page 5: Cleaning & Maintenance
Cleaning & Maintenance • Isolate the appliance rom the power supply system and wait until it has suciently cooled off • After the appliance has cooled down, the housing can be wiped clean with a damp cloth • Wipe the appliance only with a clean and lint-ree cloth or a sot brush. •... -
Page 6: Assembly Instructions
Assembly Instructions Installation When unpacking the heater, please make sure that all the items are present, there are no components let in the box, that all the parts are ree rom any packing material, and are not damaged Ensure that the items used for mounting (dowels and screws) are stable and secure enough to mounting and holding the appliance in place Do NOT connect the heater to the electrical supply until all the assembly is done Do NOT connect the heater to the electrical supply if any of the components are damaged... -
Page 7: Bracket Mounting
Bracket Mounting • Loosen the nuts on both sides, adjust the heater to the desired angle Tighten the nuts to seal in place Ensure the screws are securely connected The screws could loosen due to mechanical bearing pressure and oscillation Operation •... -
Page 8: Wiring Diagram
Wiring Diagrams Single Phase Wiring power in power out Three Phase Wiring power in To switch from 3-phase to single-phase: 1. Disconnect wires L1, L2, and L3. 2. Join these wires together as shown in the photo. 3. Reconnect them into the connection box directly opposite the incoming live (brown) power wire. -
Page 9: Technical Specifcations
Technical Specifcations Technical Specications... -
Page 10: Customer Service
Disposal In accordance with European Directive 2001/96/EG concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE), please return any electrical equipment that you are no longer using to the collection points provided for their disposal This symbol indicates that the appliance cannot be treated as normal domestic waste, it must be handed to a collection point for recycling electric and electronic appliances Inormation concerning where the equipment can be disposed o... - Page 11 Unit 9, Stort Valley Industrial Estate Stansted Road, Bishop’s Stortford Hertfordshire, United Kingdom CM23 2TU Avaiable at www.shadowindustrial.co.uk 01279 466500 ino@shadowindustrial.co.uk...
Need help?
Do you have a question about the Infnity 903693 and is the answer not in the manual?
Questions and answers