IEK ARMA2L 3 K1 Series Operation Manual

ARMA2L 3 K1 SERIES RING PULLER /
BỘ KÉO DÒNG ARMA2L 3 K1
Operation manual
IEK trademark ARMA2L 3 K1 series ring puller (hereinafter – tool) is designed
EN
to remove retaining rings.
Please, familiarize yourself with the purpose of the tool, its design and this document.
Work only with the tool in good working order . The tool shall be inspected before each
use. Insulating coatings of handles shall not have defects that lead to a decrease in
mechanical strength. There shall be no cracks, broken jaws or handles .
Use the tool only for its intended purpose. Do not use the tool as
TO OPERATE THE TOOL IN LIVE ELECTRICAL INSTALLATIONS.
TO USE THE TOOL TO TOUCH LIVE PARTS OF ELECTRICAL INSTALLATIONS OR IN
The tool is equipped with decorative covers on the handles, which are not insulating
Read the manufacturer's certificate and safety instructions carefully before starting
Failure to comply with the safety instructions for electrical fitting works may cause
Clean the tool with a rag when the work is finished. Do not use solvents or petroleum
products to clean the plastic handle.
Keep the tool out of reach of children.
Store the tool in a room free of aggressive environment, high humidity, temperature and
direct sunlight.
Dispose of the tool according to the legal requirements in the territory of utilization.
Warranty period of the tool – 1 year from the sale date, provided that the consumer
complies with the rules of operation, transportation and storage.
Service life of the tool – minimum 5 years.
Bộ kéo dòng ARMA2L 3 K1 nhãn hiệu IEK (sau đây được gọi là công cụ)
VI
được thiết kế để loại bỏ các vòng giữ.
Xin vui lòng, làm quen với mục đích của công cụ, thiết kế của nó và tài liệu này.
Chỉ làm việc với công cụ trong tình trạng hoạt động tốt. Công cụ phải được kiểm tra
trước mỗi lần sử dụng. Lớp phủ cách điện của tay cầm không được có khuyết tật dẫn đến
giảm độ bền cơ học. Không được có vết nứt, gãy hàm hoặc tay cầm.
ATTENTION
a lever, chisel, percussive tool, wedge.
IT IS FORBIDDEN
IT IS FORBIDDEN
THE IMMEDIATE VICINITY OF SUCH PARTS.
ATTENTION
against electrical voltage.
ATTENTION
ATTENTION
serious injury and breakdown of the tool.
work.
1