Page 1
SPACE SAVER TOILET SEAT RAISER RG515 Edition 3 PATENTED DESIGN USER MANUAL Please read and keep these instructions redgumbrand.com.au ASK FOR THE BRAND...
Page 2
REDGUM Brand owns the copyright to the Space Saver Toilet Seat Raiser user manual. Any information contained in this user manual shall not be photocopied, reproduced or translated into any other languages without the prior written consent of REDGUM Brand.
INTRODUCTION Thank you for purchasing this quality REDGUM Brand product. If you have any issues or questions about the Space Saver Toilet Seat Raiser please contact your supplier or REDGUM Brand direct: T: +61 8 9248 4180 E: orders@for-de.com.au A: 1 Business Way, Malaga, Western Australia 6090...
Hole 6: 625mm Handle Height: 150mm (seat to top of armrest) Product Weight: 3.5kg Maximum User Weight: 130kg Please contact REDGUM Brand if you would like any further information on your Space Saver Toilet Seat Raiser. redgumbrand.com.au ASK FOR THE BRAND...
Page 6
ASSEMBLY - UNPACK and INSPECT SUPPLIED PARTS Ensure you have been supplied with the following parts: PARTS: 1 x SEAT ASSEMBLY MAIN BODY TOILET SEAT TOILET SEAT FLAP SPLASHGUARD 1 x RIGHT 1 x LEFT HANDLE HANDLE 4 x ADJUSTABLE LEGS 4 x THUMBSCREWS (not shown to scale) 4 x SURE LOCK LEG CLIPS...
ASSEMBLY - LEG ASSEMBLY Each adjustable leg needs to be assembled prior to fitting to seat: 1. Pull out the inner leg. 2. Line up the holes, re insert the leg at the required setting. (Setting can be changed at any time). 3.
Page 8
ASSEMBLY - LEG INSTALLATION Each adjustable leg needs to be installed onto seat: Line up press button with hole 1. Place seat upside down as shown below. 2. Insert assembled leg into socket. 3. Line up red press button with IMPORTANT NOTE: the hole in wall of socket.
ASSEMBLY - HANDLE INSTALLATION Each handle needs to be installed onto seat (if required): 1. Orientate the handle as required (facing forwards or backwards). 2. Insert ends of handle into sockets on side of seat. 3. Insert thumbscrew into hole on underside of seat. 4.
USAGE GUIDELINES - SPLASHGUARD The Space Saver Toilet Seat Raiser comes with a removable splashguard. To remove the splashguard: 1. Flip up the toilet seat flap and toilet seat. 2. Using the cut outs on either side, pull out the splashguard to clean or remove if not required.
USAGE GUIDELINES - DO’s + DON’Ts Please follow these guidelines to get the optimal benefit from your Space Saver Toilet Seat Raiser. Failure to follow these guidelines may result in damage to the Space Saver Toilet Seat Raiser and put the user at risk. 130kg Maximum User Weight.
Abrasive cleaners or abrasive cleaning pads could damage the Space Saver Toilet Seat Raiser and should not be used. If you have any questions about the cleaning of the product please contact your supplier or REDGUM brand direct. redgumbrand.com.au ASK FOR THE BRAND redgumbrand.com.au...
WARRANTY Your REDGUM Brand Space Saver Toilet Seat Raiser (RG515) is covered by a 12 Month Warranty from the date of purchase. If the product has any manufacturing faults during this period contact the place of purchase for assessment. Failures as a result of ACCIDENTAL MISUSE, MODIFICATION OR WEAR AND TEAR ARE NOT COVERED BY THIS WARRANTY.
Page 14
ACCESSORIES FREESTANDING TOILET ROLL HOLDER RG5TRH SPACE SAVER SPACE SAVER BOWL + LID SPACE SAVER TOILET SEAT RAISER BOWL LID HOLDER RG5B GEL PAD RG5BLH RG51GP SPACE SAVER SPACE SAVER SPACE SAVER CADDY LOW HANDLES COLOURED HANDLES RG55C RG5LHW RED: RG5SHR BLUE: RG5SHB redgumbrand.com.au ASK FOR THE BRAND...
Page 15
Space Saver Blue Handles: RG5SHB SPACE SAVER SHOWER CHAIR Please contact your supplier RG555H or REDGUM Brand direct for Options: further information on the Space Saver Shower Chair Gel Pad: RG55GP Space Saver range of products Space Saver Caddy: RG55C and accessories.
Page 16
DISTRIBUTOR: Proudly Australian Owned and Operated redgumbrand.com.au ASK FOR THE BRAND redgumbrand.com.au...
Need help?
Do you have a question about the RG515 and is the answer not in the manual?
Questions and answers