Pioneer CT-335 Operating Instructions Manual

Opera ting
Ins tructions
@rroveer
STEREO CASSETTE DECK
A555
Thank you for buying this Pioneer product,
Please read through these operating instructions so you will know
how to operate your unit property. After you have finished reading
the instructions, keep the manual in a safe place for future
reference,
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the
drawings. However, the method of connecting and operating the
unit is the same.
WARNING : TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
IMPORTANT NOTICE
(For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel,
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage models are provided with this
switch. U.S., Canadian, European, U,K., and
Australian models are not provided with this
switch.
Mains voltages in Saudi Arabia are 127V and 220V
only. Never use this model with 110V setting in
Saudi Arabia.
The line voltage selector switch is on the rear panel. Before your
model is shipped from the factory, this switch is set to the power
requirements of the destination. Check that it is set properly before
plugging the power cord into the AC wall socket. If the voltage is
not properly set or if you move to an area where the voltage
requirements differ, adjust the selector switch as follows,
1. Disconnect the power cord.
2. Use a medium-size screwdriver.
3. Insert the screwdriver into the groove on the voltage selector,
and adjust so that the tip of the arrow points to the voltage
value of your area.
Medium-size
screwdriver
"This product is manufactured to comply with the radio in-
terference requirements of EEC Directive 76/889/EEC and 82/
499/EEC."
@) PIONEER'
The future of sound and vision.