Initial setup Important: Please read safety information on page 5 before setting up Ethos. Connect the left (powered) and right (passive) speakers by inserting the speaker cable plugs firmly into the terminals on the back of each speaker. Plug in the power cable and turn on the power switch.
Page 3
Connecting wired devices Ethos has two analog inputs: a dual RCA Audio input 1 input and a 3.5 mm AUX input. The inputs are (RCA) designed for line level sources, so you will need a phono preamp to connect a turntable. Audio input 2 (3.5mm) The audio output lets you connect other...
Connecting a Bluetooth® device To use Ethos with a Bluetooth® device, select “U-Turn Audio” in your device’s Bluetooth® settings to pair and connect. Volume can be adjusted using the volume control knob or your Bluetooth® device. For best performance, we recommend setting your Bluetooth®...
Speaker placement tips • Place your speakers 4-6 feet apart for better stereo separation. • Position your speakers so that the tweeters are at roughly the same height as your ears to ensure high-frequencies sound their best. • Place your speakers 1-2 feet away from the nearest wall for clearer bass. •...
Model Ethos 300 Power rating AC 110-120 V, 60 Hz, 100 W Dimensions 5.75”...
Page 7
FCC Part 15 Notice FCC Radiation Exposure Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and This equipment complies with FCC and IC radiation exposure limits set forth for (2) This device must accept any interference received, including interference that an uncontrolled environment.
Need help?
Do you have a question about the Ethos 300 and is the answer not in the manual?
Questions and answers