AMiO 04369 User Manual

EN PL
EN - USER MANUAL
Wireless LED light bar
TECHNICAL DATA
• Homologation: ECE R65, ECE R10, SAE
• IP66 protection standards
• 48 Super bright LED
• Voltage: DC 12-24V
• Operating temperature: -30°C to + 50°C
• USB TYPE C Rechargeable available
• Max action distance 50m between light bar and remote
• Via built-in rechargeable
(2*7.4V,4000mAh,29.6wh)
• Full of charge 5 hours allows 8 hour duration. 3 hours in
charge with 80% capacity.
• Recharged by USB type C, Input 5V, Current 2A,light body
with 4LED display:
4LED Lighting on, State of charge ≥ 75%
3LED Lighting on, State of charge ≤ 75%
2LED Lighting on, State of charge ≤ 50%
1LED Lighting on, State of charge ≤ 25%, recharge it asap
• Flash pattern selections are available on light body or
remote controller.
FLASH PATTERNS
1. Rotation
2. Single
3. Double
4. Septuple
5. Multiple-Split
6. Multiple+Split
7. Single+Double
8. Single+Double,Multiple
9. Double+Septuple 1
10. Double+Septuple,Multiple
OPERATION FOR LIGHT BAR
Press " Power " button on the light once to activate:
1. Power ON or Power OFF.
2. Change Flash patterns.
REMOTE CONTROLLER OPERATION
1. Pair / Connecting: Press "ON" button on the remote control-
2. Power On and Off: Press "ON" button on the remote control-
3. Disconnecting: Press "OFF" button on the remote controller
4. Dormancy Mode: Press
Lithium battery
5. Dormancy Activate: Just press
DECLARATION OF CONFORMITY AVAILABLE FROM
AMIO SP Z O.O. UL. HANDLOWA 3, 41 - 807 ZABRZE
waste. According to the European Directive 2002/96/EC on waste
electrical and electronic equipment and its incorporation into
national law, waste electrical and electronic equipment must be
collected separately and recycled. You can also take your used
equipment to an electronic waste collection point, which disposes
of the equipment in accordance with the National Recycling
and Waste Act. It also helps to avoid potential damage to the
environment and human health and helps to conserve natural
resources.
Bezprzewodowa belka ostrzegawcza LED
• Homologacja: ECE R65, ECE R10, SAE
• Stopień ochrony: IP66
• 48 Super jasnych diod LED
• Napięcie stałe: 12-24V
ler until the lighting gets steady for 1s and begins to flash
constantly, then the Pair/connecting is successful. This Pair/
connecting should be processed within10S of Lighting on.
ler to turn on the light. Press "OFF" to turn it off. Pattern but-
ton is available with 10patterns after turning on the light.
until the lighting gets from flash to be steady for 3s then
the remote controller will no longer be connected to the
light. This disconnecting should be processed within10S of
Lighting on.
constantly to activate power saving mode and extend bat-
tery life. And the remote controller is invalid to control the
light unless Dormancy Activate.
light 5s constantly to reactivate the light and the remote
controller is available with connection to the light again.
DECLARATION OF CONFORMITY
ENVIRONMENTAL PROTECTION!
This symbol indicates that this product should not be
disposed of with unsorted municipal waste. Electronic
equipment should not be disposed of with household
PL - INSTRUKCJA OBSŁUGI
DANE TECHNICZNE
04369
P/N:
the Power button on the light 5s
the Power button on the
1