Download Print this page

DRONEDEFENCE AEROSENTRY ONE V2 Installation Manual

Download this manual

A E R O S E N T R Y

O N E V 2

I N S TA L L AT I O N G U I D E

Need help?

Do you have a question about the AEROSENTRY ONE V2 and is the answer not in the manual?

Page 1 A E R O S E N T R Y O N E V 2 I N S TA L L AT I O N G U I D E...
Page 2 A E R O S E N T R Y O N E V 2 I N S TA L L AT I O N G U I D E Mounting pole AeroSentry One V2 Sensor 2.4/5.8GHz Antenna 2.4/5.8GHz Antenna Power cable 3G/4G Antenna D R O N E D E F E N C E .C O.U K...
Page 3 A E R O S E N T R Y O N E V 2 AeroSentry One V2 Sensor Installation Ensure that your installation location provides an optimum line of sight, with minimal building and environmental obstructions. Affix the enclosed mounting bracket to the rear of the AeroSentry Zero sensor.
Page 4: Lightning Protection
2.4/5.8GHz Antenna Lightning Protection AeroSentry One V2 does not include a lightning induction system, and should be installed within the protected region of another lightning induction system. D R O N E D E F E N C E .C O.U K...
Page 5 D R O N E D E F E N C E .C O.U K Drone Innovation Centre, Retford, DN22 7TX +44 (0) 843 289 2805 info@dronedefence.co.uk C O N T I N U E D O V E R L E A F...