Global Breezonic Solar Manual

Breezonic Solar Remote Control
Explanation of safety symbols
Danger
Warning
Caution
Note
Safety Precautions
Warning – risk of fire or explosion
• Do not subject the remote control to shock.
•
Avoid exposing the remote control to liquids.
• If the remote is damaged or you notice a burning smell,
stop using it immediately and contact
Modular Wholesale service.
• Do not let young children or pets play with the remote.
Intended use
The remote control and wall holder are optional accessories
that can improve convenience but are not required for
essen - tial control of the air conditioner.
Point the remote in direction of ADB when pressing a
button. A beep is heard on the ADB when the command is
received (unless it has been set to mute by the remote
control or app).
Turning the Breezonic on/off
Pressing the power button on the side of the remote turns
the Breezonic on and lights up the remote screen, showing
the previous settings. Pressing the power button on the
remote while the Breezonic is running will set it to standby
and turn off the remote screen.
Charging the remote
Info
• Use the supplied USB-C cable for charging to ensure
compatibility.
The USB-C connection at the bottom of the remote is the
main way to charge the internal battery, which can be fully
charged in approximately 2 hours.
The solar panel on the back of the remote assists with
providing charge and reduces the USB charging frequency.
The remote must be positioned with the solar panel recei-
ving direct sunlight for the full benefit of solar charging.
Remote wall holder
Info
• The remote can be reversed in the wall holder so that the
solar panel is facing outward, to receive charge from
sunlight.
Warning
• Do not place the wall holder in a location that may cause
the remote to fall or come into contact with liquids.
• Place the wall holder out of reach of children.
Instructions that if not followed,
will result in death or serious
injury
Instructions that if not
followed, could result
death or serious injury
Instructions that if not followed,
could result in moderate injury
or property damage
Supplementary information
More information https://www.caravansplus.com.au
The wall holder will conveniently hold the remote for easy
access. Place the holder in a convenient location using the
double sided adhesive tape on the back.
°C
°F
AUTO
Button Description
• Adjust the temperature.
• Long press '–' to cancel Bluetooth pairings.
• Long press '+' to cancel filter clean reminder.
• Press '+' & '-' to change °C / °F.
• Select operating mode (auto, cooling, de-humidifi-
cation, air circulation, heating).
• Long press to activate Bluetooth pairing of the ADB.
MODE
• The selected mode is shown on the remote.
Select fan speed (low, medium, high) The
corresponding bars show on the ADB and/or
Fan speed remote.
Turns the interior on (high, low, off). Long press
to change between cool and warm white.
Interior light
Buttons under the slide-down cover
Activate timer, adjust with + / -, SET to confirm.
Timer
Turbo mode on/off for fast heating or cooling.
Turbo
Night mode on/off for quiet operation.
Night*
Eco mode on/off to reduce energy usage.
Eco*
Turn on/off the confirmation beep from the ADB
when a button is pressed or command received
Mute
from the remote.
*Eco and Night mode are not available while using Turbo mode.
°C
°F
AUTO