Download Print this page

Advertisement

Quick Links

Junior Wardrobe Set
Congratulations on the purchase of your Junior Wardrobe Set!
PRECAUTION:
Always read and follow instructions before use | Always use the unit according to the
manufacturers guidelines | Only use the unit in a manner as intended by manufacturer.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Junior Wardrobe Set and is the answer not in the manual?

Questions and answers

Summary of Contents for milliard Junior Wardrobe Set

  • Page 1 Junior Wardrobe Set Congratulations on the purchase of your Junior Wardrobe Set! PRECAUTION: Always read and follow instructions before use | Always use the unit according to the manufacturers guidelines | Only use the unit in a manner as intended by manufacturer.
  • Page 2: W E ' Re H E R E To H El P

    TIMES IN ACCORDANCE TO FEDERAL AND LOCAL LAWS OR REGULATIONS. BUYER ASSUMES ALL RISKS AND LIABILITY FROM MISUSE OF THIS PRODUCT AND MILLIARD SHALL NOT BE HELD LIABLE BEYOND THE INITIAL PURCHASE COST OF THE PRODUCT FOR ANY DAMAGES ARISING FROM ITS MISUSE.
  • Page 3 WARDROBE PA RTS Storage Divider ×2 Bottom Panel ×1 Top Panel ×1 Wall Brace ×1 Right Panel ×1 Left Panel ×1 Hanger Rod ×1 Hanging Knobs ×3 Basket Insert ×3 Storage Basket ×3 HA RDWA RE Cam Screw ×4 Locking Cam ×4 Dowel Peg ×16 Long Bolt ×12 Short Screw ×8...
  • Page 4 ASSEMBLY INSTRUCTIONS STEP 1 Begin assembly by pressing locking cams into the holes in each storage divider with the cross pattern facing out. STEP 2 Then prep the bottom panel and top panel by fastening cam screws and dowel pegs in the pre-drilled holes. STEP 3 Attach the storage dividers onto the top and bottom...
  • Page 5 STEP 4 • Insert dowel nuts into the holes underneath the bottom panel and top panel . • Then, fit dowel pegs into the pre-drilled holes on the sides of the panels. STEP 5 Attach the right panel using long bolts...
  • Page 6 STEP 6 Insert dowel nuts into the back of the wall brace . STEP 7 Attach the wall brace to the right panel using long bolts . STEP 8 Then attach the hanger rod at top of the right panel with a short bolt .
  • Page 7 STEP 9 • Attach bottom panel , top panel , wall brace to the left panel using long bolts . • Secure the hanger rod to left panel using a short bolt . STEP 10 Attach the hanging knobs with long screws to the top of the left panel .
  • Page 8 STEP 11 With both left and right panels installed, you may attach the panel braces with short screws STEP 12 It is strongly recommended that the wardrobe be secured to a wall for stability and safety. Use a pencil to mark the holes onto the wall;...
  • Page 9 STEP 13 Once the anchors are in place, stand the wardrobe in front of them and use wall screws fasten the wardrobe to the wall. STEP 14 Place basket inserts in the storage baskets and insert them in the storage area. Note: Don’t forget to remove the...

This manual is also suitable for:

Mil-dups