Do you have a question about the Set Top Box and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for GALA Set Top Box
Page 1
GALA DIGITAL TV INSTALLATION MANUAL WWW.GALA.LT...
Page 2
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and certain limited pay-per-view uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Dear customer, Thank you for choosing GALA digital television. We wish you a great experience and unforgetable moments! This manual will help you install the TV kit. It contains the sufficient information to enable you to use the GALA TV service.
2. Kit Contents IP Set-top box Remote control with 2 AAA batteries ETHERNET cable SCART cable AC adaptor GALA DIGITAL TV INSTALLATION MANUAL Installation manual WWW.GALA.LT...
3. Preparing the Remote Control for Use To prepare your remote control for use, insert the batteries. Carefully place the terminals (+ and -) of the bat- teries as indicated on the back of the battery com- partment. 4. Set-top Box Placement For best reception of the IR-signals from the remo- te control to the set-top box, make sure to place the set-top box close to the edge of your TV set or...
5. VIP1920 Overview / Continuation Rear panel COMPONENT (YPbPr) for connection to TV set (analog High Definition video): this connector is designed for transmission of ETHERNET SCART S/PDIF high definition video signal for broadband for connection to for connection (it also may be used to connection additional equip- to digital audio...
7. Installing the Set-top Box Connect your Set-top box and the Home Gateway with the ETHERNET cable. S/PDIF ETHERNET RF - IN HDMI POWER RF - OUT +5.7V DC TOSLINK Connecting SpeedTouch Home Gateway Your broadband Internet kit includes a Speed Touch 546/585 hub. Connect the other end of the Ethernet cable routed from the set-top box to the Ethernet connector No.
Page 9
Watching Programs To watch programs received with your set-top box, set up your TV set for video reception: a) After your TV set and STB is switched on, GALA TV program should automatically appear on your TV screen b) If GALA broadcast does not automatically start, you must activate A/V mode on your TV set. In some models it is done by selecting Channel 0, in others you must press A/V or TV/AV button on the remote control to activate A/V mode.
GALA TV main menu is displayed. 9. Signing In You will need to sign in only once, when you use the GALA TV service for the first time. If you are not automatically redirected to the sign in page, press MENU button on your remote control.
11. Customer Support If you are unable to use the service or experience any problems, perform the following troubleshooting procedure: 1. Make sure all cabling and connections are correct according to the diagrams provided in this manual and all devices are plugged into the mains. a) Make sure the frequency spitter connections to other equipment are made with correct cables b) Make sure any additional devices such as a second phone, ANI device or fax machine are...
Connecting the Video Recorder • You can record the program you are watching by using an auxiliary device, such as a VCR or a digital video recorder, to your GALA Set-top box. • Connect the set-top box to the auxiliary devi- ce using the SCART connector.
Page 15
Connecting to External Audio Equipment If you want to use an external source to play audio such as a stereo or home cinema equi- pment or if you are using the component connectors to connect the Set-top box to the TV set, there are three possible options for connecting to audio.
Page 16
VIP 1920. CHANGING CONFIGURATION Setting Up VIP1920 Set-Top Box It is required to watch VIP 1920 set-top box may be also connected to your TV set through HDMI or antenna (RF) connector. The purpose of this manual is to describe how to make the necessary changes. 1.
Page 17
5. RF MODULATION Firmware Configuration Menu After RF modulation is activated, select the Video RF Modulator Configuration desired channel number (frequency) for vi- RF Modulator Enabled: Use OK/Right Arrow to toggle deo and audio transmission from your set- Channel: (591250 kHz) top box to the TV set.
Need help?
Do you have a question about the Set Top Box and is the answer not in the manual?
Questions and answers