Built-in chirp/broadband and structurescan sonar (64 pages)
Summary of Contents for B&G LOWRANCE SIMRAD S3100H
Page 1
S3100H Sonar Module INSTALLATION GUIDE In the box A 1x S3100H sounder module B 1x power cable C 4x #8 x 3/4" SS Phillips self-tapping screws D 1x Ethernet cable (yellow, 5-pin) E 1x 5 A fuse and fuse holder...
Page 2
Power A Ping synchronization (blue) B Power control (yellow) C 12/24 V DC (red) D DC Negative (black) E Fuse 5 A F Switch G Earth-ground connection point Transducer Ethernet ¼ Note: Only one X-coded M12 GbE to yellow Ethernet adapter can be used between devices.
Page 3
Connectors and LEDs Connector LED Status Sonar 2/ Sounder not operating Imaging Flashing - green Searching for bottom signal (black) System operating with bottom signal Sonar 1 Sounder not operating (blue) Flashing - green Searching for bottom signal System operating with bottom signal Ethernet 1 No connection (yellow...
Page 4
Technical specifications Environmental Operating temperature -15° C to 55° C (5° F to 131° F) Storage temperature -20° C to 60° C (4° F to 140° F) Waterproof rating IPX6 and IPX7 Electrical Supply voltage 12 - 24 V DC (10.5 - 31.2 V DC) Recommended fuse rating Reverse polarity protection Power consumption (maximum)
Need help?
Do you have a question about the LOWRANCE SIMRAD S3100H and is the answer not in the manual?
Questions and answers