Page 13
KUMI X3 Pro OWS Air Conduction Open-ear Headphone Product Instructions Please make sure to read this manual carefully and keep it properly V1.0...
1. Packing list Case*1 KUMI X3 Pro*2 Charging Cable*1 Product Brochure*1 2. Wearing method Remove the earphones from the charging case and slide the earpieces behind your ears until they hang gently on your ears -14-...
· Entering pairing mode if the device fails to connect back · Turn on the Bluetooth function of your device · Select "KUMI X3 Pro" for connection * When the device is connected to the earphones, the battery level of the...
Page 16
Reconnecting after a long distance disconnection If the KUMI X3 Pro earphones are disconnected from the device due to distance, the connection between the earphones and the device will be automatically restored if the distance is returned to a valid distance within 5 minutes;After more than 5 minutes of returning to a valid distance and...
6. Earphone operation Call control Answer/hang up:Double Touch L/R Single earphone operation Rejected:Long touch L/R 2 sec Music control Play/pause: Double touch L/R Previous song: Three touches L Next song: Three touches R Game modes Entry/Exit: Long touch R for 2 sec Wake up the voice assistant Long touch L 2 sec Dual earphone operation...
7. Indicator light description Power ON The white light is on for 1s Power OFF The red light is on for 1s The red and white lights Earphone pairing flash alternately The earphones is charging The red light stays on for 5s The case is charging The red light flashing The case is fully charged...
9. Specifications Product Name: OWS Air Conduction Model: KUMI X3 Pro Open-ear Headphone Product Size: 142.8*50.3*30.1mm Distance: ≥10m Bluetooth Version: BT5.3 Drive Unit: 14.2mm Impedance: 16Ω Frequency Response: 20Hz-20KHz Frequency Band: 2400-2483.5MHz Battery: Earphone 70mAh/Case 400mAh Charging Time: ≈1.5h Endurance time: ≈6h Standby time:...
Page 20
Important safety information Please handle the earphones and charging case with care. They contain highly sensitive electronic components (including batteries) which can be damaged, destroyed or cause personal injury if dropped, burned, punctured, crushed, disassembled or exposed to high temperatures, liquids or high concentrations of industrial chemicals (including near evaporative liquefied gases, such as ammonia).
Page 22
· The company has the right to modify any information in this manual at any time without notifying any third party, and does not assume any responsibility to the third party for such modification; · Without the written consent of the company, any unit or individual shall not extract, copy or use the contents of this manual in any other way, and shall not transmit it in any form;...
Page 23
13. FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 24
KUMI Technology Co., Ltd. Web: www.kumi.top Service Tel: (+86)400-0222-503 Address: Room 105, 1F, Area A, Building 2,Creative Bonded Area, Binlang Street ,Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone, Futian District, Shenzhen Made in China -24-...
Need help?
Do you have a question about the X3 Pro and is the answer not in the manual?
Questions and answers