Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HighPoint R1749E
Summary of Contents for HighPoint R1749E
- Page 1 R1749E 8x E1.S Port to PCIe 4.0 x16 NVMe Switch AIC Quick Installation Guide V1.00...
-
Page 2: Kit Content
System Requirements PC Requirements System with a free PCIe x16 slot All the Operating Systems with Native NVMe Driver Kit Content 1x R1749E NVMe Switch AIC 1x Quick Installation Guide... - Page 3 R1749E Hardware Front View Full-Length anodized aluminum heat sink Full Height form factor External power port Low-Noise Cooling Fan PCIe 4.0 x16 Host Interface...
-
Page 4: Hardware Installation
Hardware Installation 1. Use a wired ESD wrist strap that is properly grounded. 2. Unpack and remove the R1749E and check it for damage. If it appears damaged, please get in touch with HighPoint Technical Support. 3. Apply pressure to release the lock, and turn it counter-clockwise. - Page 5 5. Align the fan module and press down to secure. 6. Shut down the system and disconnect the AC power cord. 7. Align the R1749E to one of the motherboard’s available slots. Press down gently but firmly to seat the R1749E correctly in the slot.
- Page 6 Note: In case the motherboard PCle slot has insufficient power, connect the 6-pin PCle power cable to the external power connector on the right side of the R1749E before turning on the system's power.
- Page 7 Resources Various manuals, guides, and FAQs are available for the R1749E NVMe Switch AIC. For Documentation and more information about this product, please visit the following website: https://www.highpoint-tech.com/nvme-switch-aic/gen4/rocket-1749e FAQ & Troubleshooting: FAQ - HighPoint Technologies, Inc. (helpjuice.com) Customer Support If you encounter any problems while utilizing the R1749E or have any questions about this or any other HighPoint Technologies, Inc.
Need help?
Do you have a question about the R1749E and is the answer not in the manual?
Questions and answers