Advertisement
Quick Links
Tag Wireless Charger
T10 User Manual
How to USE
1.Connect 12V, 1A power to the 2 ports on the bottom of the product
(Caution: When using the product, 12V, 1A power and
USB C type power should not be connected at the same time)
2.The power turns on and the yellow LED indicator blinks
approximately 3 to 5 times.
3. Place the tag device you want to charge on the high-speed
wireless charging stand.
4.When wireless charging is activated, the red charging/charging
complete green LED lights up
Foreign Object Detection(F.O.D)
Foreign oblect detection mode
When the red LED blinks, a foreign object has been detected.
Remove foreign substances (foreign substances: metal, credit cards,
other strongly magnetic substances)
Advertisement
Summary of Contents for SmartOne T10
- Page 1 T10 User Manual How to USE Tag Wireless Charger 1.Connect 12V, 1A power to the 2 ports on the bottom of the product (Caution: When using the product, 12V, 1A power and USB C type power should not be connected at the same time) 2.The power turns on and the yellow LED indicator blinks...
- Page 2 T10 User Manual Parts Components Safety rules Do not leave the product in a wet place or near fire or high heat where there is a risk of fire. Charging status indicator LED Do not apply strong shock or pressure to the product.
- Page 3 T10 User Manual FCC COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the T10 and is the answer not in the manual?
Questions and answers