Ranger Products RWB-2D Operation And Assembly Manual

MODELS:
RWB-2D
2-DRAWER HEAVY DUTY WORK BENCH
RWB-2S
2-SHELF HEAVY DUTY WORK BENCH
RWB-1TD
HEAVY DUTY WORK BENCH WITH FLUID CATCH
RECEIVING
The shipment should be thoroughly inspected as soon as it
is received. The signed Bill of Lading is acknowledgement
by the shipping carrier as receipt of this product as listed
in your invoice as being in a good condition of shipment. If
any of these goods listed on this Bill of Lading are missing
or damaged, do not accept merchandise until the shipping
carrier makes a notation on the freight bill of the missing or
damaged goods. Do this for your own protection.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING WITH THIS HEAVY
DUTY WORK BENCH ASSEMBLY YOU AGREE THAT YOU FULLY
UNDERSTAND AND
DOCUMENT. FORWARD THIS IMPORTANT MANUAL TO ALL OPERATORS.
OPERATION AND ASSEMBLY MANUAL
BE SAFE
Your new work bench was designed and built with safety in
mind. However, your overall safety can be increased with
proper training and thoughtful operation on the part of the
operator. DO NOT operate or repair this equipment without
reading this manual and the important safety instructions
shown inside. Keep this operation manual near the align-
ment system at all times. Make sure that ALL USERS read
and understand this manual.
1
SAVE THIS MANUAL
COMPREHEND THE FULL CONTENTS OF THIS
Revision A 12-30-2015
P/N 5900961
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Toll Free 1-800-253-2363
Tel: 1-805-933-9970
Fax: 1-805-933-9160
www.bendpak.com