Summary of Contents for Signature Faucets KLEMPNER
- Page 1 Signature Faucets [ E N D T H E O R D I N A R Y . ] KLEMPNER Professional Pull Down Spray Dual Handle Kitchen Faucet I N S T A L L A T I O N M A N U A L signaturefaucets.com...
-
Page 2: Quick Links
California: 1.8 GPM max (6.8L/min) @ 60psi THANK YOU FOR CHOOSING SIGNATURE FAUCETS We appreciate the trust and confidence you have placed in us. Our products are manufactured to the highest standards of quality and workmanship. However, if you are not satisfied with this product, please do not hesitate to contact us at info@signaturefaucets.com or scan the QR code... -
Page 3: Prior To Installation
To ensure a smooth installation process, kindly read all instructions prior to installation! Failure to do so could result in personal injury, property damage, or product failure. Please note that Signature Faucets will not be held responsible for any labor charges, damages incurred during installation, repair, or replacement, or any indirect, incidental, or consequential damages, losses, injury, or costs of any nature related to this faucet. -
Page 4: Diagram & Parts List
INSTALLATION MANUAL DIAGRAM & PARTS LIST Faucet Rubber Washer Metal Washer Faucet Shank Mounting Nut Hot and Cold Flexible Supply Hoses signaturefaucets.com info@signaturefaucets.com SKU-SF-KF-21821 | REV 1... - Page 5 INSTALLATION MANUAL Mount Faucet Shank Fit the faucet shank (X) into the groove of the faucet (X) . Screw waterlines (X) into the corresponding screw-hole of the faucet (X) . Mount Faucet to Deck Mount Faucet to Deck Position the waterlines (X) and faucet shank (X) into the hole in the countertop. Place the rubber washer (X), metal washer (X), and mounting nut (X) onto the faucet shank (X).
-
Page 6: Connect Water Line
INSTALLATION MANUAL Connect Water Line Connect the hot and cold flexible supply hose (F),to their respective water outlets. Flush Out Debris Grab the spray head hose, unscrew the spray head, and remove it along with the rubber washer. Turn on the faucet and let the water run for a minute to flush out debris. Turn off the faucet and re-install the rubber washer and spray head. -
Page 7: Check For Leaks
INSTALLATION MANUAL Check for Leaks Check connections indicated by arrows for any signs of leaks, and retighten if needed. If leaks persist after tightening, inspect the seals for damage. Pull the spray head from the spout and use the trigger to switch between aerator and spray modes. CLEANING &...
Need help?
Do you have a question about the KLEMPNER and is the answer not in the manual?
Questions and answers