Download Print this page

Front Runner Pro Water Tank Manual

With mounting system 42l

Advertisement

Quick Links

front runner
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
WTAN088_REV_A00
Pro Water Tank
With Mounting System 42L
READ ME !
Thank you for purchasing a Front Runner 42L Pro Water Tank Strap.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
1
WTAN088
© 2024 FRONT RUNNER VEHICLE OUTFITTERS
ENG

Advertisement

loading
Need help?

Need help?

Do you have a question about the Pro Water Tank and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Front Runner Pro Water Tank

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2 M8 x 16 Hex Bolts Eye Nut M8 x 16 x 1 Flat Washer Nylon Washer M8 Thin Nut M8 x 30 Hex Bolt TOOLS NEEDED M8 Nut Cap 10mm 13mm FIGURE 1.1 WTAN088_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 Rear Strap (Item 3). Loosely fit the M6 Nyloc Nut and M6 x 12 x 1 Flat Washer (Items 17 & 18) to the T-Bolts at the en for the Rear Strap as shown. T-BOLT WTAN088_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 FIT AND SECURE SLII SIDE PROFILE FITMENT Choose where you would like to mount your Pro Water Tank, on your Front Runner Rack. Assemble the M8 x 30 Hex Bolt and M8 Thin Nut (Items 11 & 12) as shown.
  • Page 5 13mm If the tank is not in use, the Strap can be removed by sliding it out at the T-Slot of the Rear Mount Bracket. M6 Nyloc Nut T-Slot WTAN073_REV_A01 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 6 Mounting Bracket assembly from 4.2. Use the tank as a guide for the mounting brackets before fully tightening. Divide the T-Slot Rubber in two equal lengths and insert into the slats indicated (A). WTAN088_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 7 If the tank is not in use, the Strap can be removed by sliding it out at the T-Slot of the Rear Mount Bracket. M6 Nyloc Nut T-Slot WTAN088_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 8 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...

This manual is also suitable for:

Wtan088