Advertisement
Quick Links
Quick Start Guide
Thank you for purchasing Atlas Baby – the pediatric ALS Simulator
Connecting Atlas Baby with REALITi 360: A Simple Guide
Scenario 1: Your existing Wi-Fi router is called iSimulate-5.0
1. Power Up: Start by turning on your iSimulate-5.0 router.
2. Wi-Fi Connection: Ensure both the REALITi Monitor iPad and
the Control iPad are connected to the iSimulate-5.0 network.
WiFi Name: iSimulate-5.0
Password: iSimulate2012
3. Turn On Atlas Baby: Locate and press the power button on
the back of the manikin. This will automatically connect it to
the iSimulate-5.0 network. Once the connection is successful,
the power button will change from yellow to green.
Advertisement
Summary of Contents for 3B SCIENTIFIC Atlas Baby
- Page 1 Control iPad are connected to the iSimulate-5.0 network. WiFi Name: iSimulate-5.0 Password: iSimulate2012 3. Turn On Atlas Baby: Locate and press the power button on the back of the manikin. This will automatically connect it to the iSimulate-5.0 network. Once the connection is successful,...
- Page 2 4. Launch REALITi App: Open the REALITi app on both iPads, selecting ‘Staging’ on the Monitor and ‘Control’ on the Control iPad. 5. Connect iPads: Use the ‘Tap to Connect’ feature on the Control iPad to link both devices. If the Monitor iPad does not appear in the list, check that the Staging iPad and the Monitor iPad are both connected to the Wi-Fi network of your REALITi router: iSimulate-5.0 (both iPads must be on the same Wi-Fi network).
- Page 3 8. On the Monitor iPad, the scenario or monitor selected from 9. Scan for Atlas Baby: Swipe in from the right screen edge step 7 should appear. Start the defibrillator. of the Monitor iPad and tap “Rescan Devices” to show the “Available Devices”.
- Page 4 3. Scan for Atlas Baby: swipe in from the right edge of the 4. Upon successfully connecting to ‘Atlas Baby Wi-Fi Config,’ Monitor iPad’s to reveal the ‘Available Devices’ menu. Select access the ‘Settings’. ‘Rescan Devices’ and choose ‘Atlas Baby Wi-Fi Config’ from the list by tapping ‘Connect Device.’...
Need help?
Do you have a question about the Atlas Baby and is the answer not in the manual?
Questions and answers