Nobis UNICA 10 V/C Instructions For Installation, Use And Maintenance Manual

Advertisement

Quick Links

EN - Installation, use and
maintenance manual
UNICA 10 V/C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UNICA 10 V/C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nobis UNICA 10 V/C

  • Page 1 EN - Installation, use and maintenance manual UNICA 10 V/C...
  • Page 2: Burn Hazard

    PAY ATTENTION TO THE SECTION OF THE SMOKE DUCT, WHICH MUST WIDHSTAND TEMPERATURES THAT CAN EASILY REACH 650°C. NEGATIVE PRESSURE IN THE SMOKE EXHAUST SYSTEM MUST RESPECT THE VALUE OF 12Pa. THIS APPLIES FOR PELLETS COMBUSTION AS WELL, NOT ONLY FOR WOOD BURNING. WHEN INSTALLING THE PRODUCT, COMPLY WITH UNI 10683 STANDARD.
  • Page 3 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” INDEX 9.1 DATE AND TIME SETTINGS 9.2 ROOM PROBE SETTINGS (REMOTE CONTROL) 9.3 USER/AUTO MANAGEMENT 1 INTRODUCTION 9.4 ROOM TEMPERATURE ADJUSTMENTS 1.1 SYMBOLS 9.5 HEARTH POWER SETTINGS 1.2 INTENDED USE 1.3 IMPROPER USE 10 PELLET MODE 1.4 IMPORTANCE OF THE MANUAL...
  • Page 4 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” WOOD 01 - BLACK OUT 02 - NO IGNITION 03 - PELLETS FINISHED 04 - SMOKE TEMPERATURE 05 - SMOKE EXTRACTOR NOT RESPECTING RPMs 41 06 - FAULTY SMOKE EXTRACTOR PELLET-LOADING...
  • Page 5: Importance Of The Manual

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” INTRODUCTION IMPROPER USE The product designed and built with high-quality The product must not be intended for uses materials and in compliance with the reference other than that for which it was expressly made.
  • Page 6: Legal Warranty

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” • In the event of a fire in the flue, contact the Fire LEGAL WARRANTY Brigade immediately. • The product cannot be used by a minor, a In order to enforce the legal guarantee, the...
  • Page 7 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” painted, chromed or gilded details, handles, collection helps to avoid possible negative electric cables, lamps, ignition resistors, lights, consequences for both environment and health knobs, and all parts that can be removed from which can derive from inappropriate disposal.
  • Page 8: Installation Site

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” • packaging: bags made of eco-compatible or • treated wood (chipboard, lacquered, bio-decomposable material. varnished, glued, etc.) • treated paper and cardboard (varnished, For the products in the range, the Manufacturer oiled, impregnated kitchen paper, etc.)
  • Page 9 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” • The installation room must have a minimum between the ventilation room and the installation volume of 50 m3 room must be doubled at each passage (see • Minimum safety distances for fire prevention UNI10683).
  • Page 10 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” compensation for damages due to non-compliant length, safety distances from flammable materials installation of the ventilation ducts with respect to as per specifications given by the smoke duct the above, and to the technical standards and all manufacturer.
  • Page 11: Chimney Top

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” fireplace/flue shared with other appliances or in the presence of extractor hoods or other aspirators. Collective flues are not permitted. It is forbidden to expel exhaust directly from the wall or into closed...
  • Page 12 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” INSTALLATION CERTIFICATE OF CONFORMITY on the whole Italian territory. Esempi: (A) horizontal section needed for connection to an existing flue. Observe a minimum upward slope (3-5%) to reduce the quantity of ash deposit in the horizontal section of the pipe, which must not exceed 2m (1).
  • Page 13: Unpacking The Product

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” • Declaration of Conformity of the system to standard (M.D. 37/08); • general description, or diagram, or photographic documentation of the changes made to the system, if intervention was necessary during installation;...
  • Page 14 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” purchased from your trusted dealer/assistance centre. The installation, disassembly / reassembly of the appliance must be carried out by qualified personnel authorized by Nobis Srl. Please note that opening the appliance by unauthorized personnel will invalidate the product warranty.
  • Page 15: Electrical Connection

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” side pre-cut sheet 3.12 ELECTRICAL CONNECTION The product power cord must be connected only after the complete installation and assembly of the product. The cord must not enter in contact with hot parts and must remain accessible even after installation.
  • Page 16: Product Maintenance

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” PRODUCT TECHNICAL DATA This chapter provides all the technical data of the product: overall dimensions, installation dimensions and minimum mandatory distances to be kept from walls, furniture and any flammable objects that can be found in the premises where the product is installed.
  • Page 17: Product Dimensions

    Società proprietaria tutela i propri diritti a rigore di legge. N0060-SMAN-E1 Via Palazzolo,11 25037 All proprietary rights reserved by NOBIS S.r.l. This drawing shall not be Pontoglio - BS - Italy reproduced or in any way utilized for the manufacture of the component of unit herein illustrated and must not be released to other parties without P.iva e Cod.
  • Page 18 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” confirm and move to the next screen. Remove the battery cover on the back of the remote control, as shown in figure C, and insert Follow the instructions displayed on the remote 3 batteries (1.5V alkaline AAA type) in the...
  • Page 19: Description Of The Remote Control

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” not closed correctly, an acoustic signal warns the user to close it as soon as possible. In this case the ↓ ↓ pellet loading is interrupted. Ignoring the warns CH 1...
  • Page 20: Remote Control Functions

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” Increase key (selection key) Serial connection (for authorised staff ONLY) Decrease key (selection key) USB connection (use by authorised staff ONLY) ON/OFF button and “awakening” from SLEEP mode Emergency cable connection...
  • Page 21: Icon Overview

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” Press OK to confirm or wait for 3 seconds: the appliance will confirm the change automatically. An acoustic signal indicates that the change was successful. FLAT BATTERY SIGNALLING If case of low batteries, the remote control will...
  • Page 22: Menu Browsing

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” MEANING MEANING CLEANER ON (cleaning and brazier emptying) ADD MORE FIREWOOD (see dedicated paragraph) ACTIVE COMFORT CLIMA WARNING (see dedicated paragraph) RESTART FROM COMFORT CLIMA MENU BROWSING FINAL CLEANING To access the menu, press OK from the stand-by screen to browse the selection items, as illustrated in below.
  • Page 23: Date And Time Settings

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” carried out when switching on the appliance. DATE AND TIME SETTINGS Here is the procedure to set date and time, useful for the programmable thermostat, equipped on the products in the range.
  • Page 24: Operating Procedure

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” This function allows to adjust the temperature in the room where the product is installed. From the STAND-BY screen, press ↑ to activate value modification. Press ↑↓ to make changes. Press OK to confirm, or wait 3 seconds for Edit the data highlighted using the keys ↑↓...
  • Page 25: Eco Mode

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” 10.1 PRODUCT SWITCH-ON/OF 10.2 FUNCTIONING (PELLET MODES) To turn on the product, hold the button pressed Like all other Nobis’ pellet products, Unica has 7 operating powers. The power level is represented...
  • Page 26: Practical Example

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” When switched back on again in COMFORT CLIMA The cursor is positioned on the line that allows the mode, the remote control will display the following: activation and deactivation of the function (key OK).
  • Page 27: Wood Burning

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” predetermined time depending. There is the possibility activate the POWERFUL function within a special time band. This is useful in places with, e.g., subjected to very cold climates. This option does not switch on the stove, but can work within a time programme or else it can be Press ↑↓...
  • Page 28 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” automatically, without need adjustment lever. From firmware version 008, failure to respond to the question “wood present?” during non-active phases (such as OFF, ECOSTOP and ALARM) is RECOMMENDED interpreted by the system as NO, contrary to what Below you can find some tips to make the best out happens when the product is in an active phases.
  • Page 29 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” changing the power affects the air supply, and the firewood will burn more or less slowly as a result. From the STAND-BY screen, press ↑ to change the values. Values range from 1 to 3. They are represented by black boxes visible below room temperature.
  • Page 30 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” WOOD ALERT The scheduled shutdown is valid ONLY for the current operating phase. Therefore, in case, This function allows you to activate or deactivate after a few hours from switching off, a time the automatic sound warning “Reload wood”.
  • Page 31: Manual Ignition

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” chamber) and then start the ignition cycle in pellets mode, after answering (YES) to the question “Wood present?”. In case the user answers NO or else does not answer at all, Unica starts in pellets mode, in the specific paragraph.
  • Page 32: Programmable Thermostat

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” MANUAL IGNITER and use the primary-air handle To Adjust Combustion, as illustrated in chapter 11.4 “Blackout”. Unica allows the opening and closing of the primary combustion air via an extractable handle, while secondary and tertiary air, being mechanically Press ↑↓...
  • Page 33 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” You can now turn on the appliance via remote control. OPERATING PROCEDURE: > > menu user settings auger loading Access the menu by pressing OK Press ↑↓ to edit the switch on/off times, and Scroll the items up to USER SETTINGS, key ↓...
  • Page 34: Stove Status

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” Select a value between 0 and 2. The value 0 Scroll the items up to P/W/A RATIO, key ↓ Access the menu by pressing OK refers to the default setting, and 2 represents the Press OK to access the function maximum amount of combustion air.
  • Page 35 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” Access the menu by pressing OK that the desired room temperature has been reached. Press ↑↓ to select the type of screen you want to display Press OK to access the submenus.
  • Page 36: Firmware Version

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” Press ↑↓ to adjust the contrast. condensation in the flue exhaust as well. Pay particular attention to any formation of condensation in the exhaust pipe, as it could severely damage the product. In this case, the damages are not covered by the 24-month European warranty on manufacturing defects.
  • Page 37: Edit Settings

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” • with temperature control - with room probe and function), the ducting fan will never turn on, as the external thermostat (not supplied). system will detect a T.OFF value. OPERATING PROCEDURE: EDIT SETTINGS >...
  • Page 38 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” T. is deactivated in SETTINGS > DUCTING. PHASE DESCRIPTION 13.3 DISPLAY DUCTING STATUS MECHANICAL cleaning of the brazier is in progress. The appliance turns off Press OK to turn on the remote control and and on automatically.
  • Page 39: Alert Overview

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” PHASE DESCRIPTION PHASE DESCRIPTION The stove temporarily increases the hearth power only to raise the temperature of The appliance is switching off and it has the fumes and avoid serious damage by not fully cooled down yet.
  • Page 40: Description Of Alarms

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” PELLETS and WOOD PHASE DESCRIPTION PHASE DESCRIPTION Something triggered an alarm: press the OK for further details. When the user opens the door, the NB: when the cause of the problem...
  • Page 41 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” appliance back using the remote control. Long The electrical resistor responsible for ignition press of the power button . The heat generator is defective or not in the correct position. carries out a final cleaning...
  • Page 42 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” 06 - FAULTY ALARM CODE REASON SMOKE No power to the fume extractor. The brazier automatic cleaner has not 12 - FAULTY EXTRACTOR completed its movement and is not in BRAZIER the correct position, or else the door is not The smoke extractor is blocked.
  • Page 43 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” SOLUTION Have the power supply voltage checked by a trusted electrician. Try to turn the Check the correct closure of the door plug in the wall socket to reverse Phase and/or the correct insertion of the ash and Neutral - if this fixes the problem, the pan in its housing.
  • Page 44 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” European warranty on manufacturing defects. If the problem persists, contact the Authorized Assistance Service. 19.1 FIRE COMPARTMENT CLEANING ALARM CODE REASON 31 - FAULTY PELLETS The automatic system managing the PELLET/WOOD-...
  • Page 45 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” During this phase, pay particular attention, as the embers keep burning beneath the ash for several hours: risk of fire in the ash vacuum cleaner and/ or burns. 19.2 CLEANING OF THE DOOR GLASS...
  • Page 46: Maintenance Timetable

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” left in it. This is to prevent the pellets from absorbing humidity during the summer season. Humid pellets can flake apart and clog the auger. OPERATING PROCEDURE: Let the pellets finish in the tank and consume as much as possible.
  • Page 47 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” PARTS FREQUENCY 7 DD Ash drawer (suggested period) 2-3 DD Glass 2-3 DD Combustion chamber Cleaning of the bottom of the 30 DD pellet tank 1 SE Extractor duct* 1 SE...
  • Page 48: Wiring Diagram

    ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” WIRING DIAGRAM 220V VMAN EXT.T 220 V - 24 V 220V RELAY ELECTROMAGNET TRANSFORMER LEGEND: SAFETY VACUUM REMOTE UNIT SELECTION PRESSURE SENSOR SMOKE EXTRACTOR SWITCH STROKE COUNTER UPGRADE FW KEY FRONT SIDE...
  • Page 49 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” MAINTENANCE DATE INTERVENTION PERFORMED...
  • Page 50 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” ANNOTATIONS...
  • Page 51 ENGLISH Use and maintenance manual, model “UNICA 10 V/C”” ANNOTATIONS...
  • Page 52 NOBIS Srl Via Aldo Kupfer, 31 25036 - Palazzolo s/O - BS www.nobisfire.it Nobis Srl cannot be held, in any way, liable for any errors in this manual and considers itself free to change the features of its products without prior notice.

Table of Contents