Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support SOLAR HEATED SHOWER MODEL:LY35L08 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully. Keep small parts, plastic bags and other packaging out of the reach of children. Pay attention especially when unpacking your item. The danger of suffoca- tion! Check the delivery for completeness. Later complaints cannot be accepted. Check all elements and parts for damage.
The shower water is not suitable for drinking. When not in use, the shower should be emptied and the faucet kept quiet to prevent the growth of bacteria. Wipe the shower clean after use. - Make sure that no electrical devices and / or power connections are in contact with shower or in the area of the shower sprinkler system.
Before Putting Into Service 1. Take the parts of the solar shower out of the packaging. 2. Check whether the delivery is complete. 3. The solar shower is equipped with a base and four ready-made drilling arrangements for screw installation on firm ground. Make sure the screws are tight. The filled solar shower is heavy and a fall could have dangerous consequences.
Page 6
Check whether moving parts of the device work properly and do not jam, and whether parts are broken or damaged so that the function of the device is impaired. Have damaged parts repaired before using the device. Many accidents are caused by poorly maintained equipment Assembly Before you assembly, please make sure you have all parts, read all instructions.
Page 7
Item Reference Image QTY. Item Reference Image QTY. 1. Screw both parts together with the connecting clamp. Pay attention to the connection on the inside. These have to be put together exactly to avoid water leaks. 2. Now check the shower for stability! Possibly. It may be necessary to retighten the screws or place washers in between.
Page 8
in order to achieve maximum tightness. Wrap 2 rounds (approx. 0.5 cm) of the Teflon tape tightly around the rear part of the thread and then screw the shower head with the tape into the shower body. Be careful not to damage the thread when screwing it on.
Page 9
DO NOT OVERTIGHTEN! Please use some Teflon tape to ensure that the shower head and the foot shower are screwed on watertight. Wrap a few layers (4-5 windings) of Teflon tape around the thread and then screw it into the shower. Note for the installation of the single-lever mixer: 1.
Storage and Maintenance Make sure that there is no more water in the shower when you store it. Keep the shower away from frost as it can damage the shower and its mechanism. At the first sign of frost or as soon as it is foreseeable that frost may occur, the water in the shower must at least be drained.
Page 12
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the LY35L08 and is the answer not in the manual?
Questions and answers