Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Realme Watch S2 Grigio o cerca il tuo prodotto tra le migliori offerte di Smartwatch e wearable Detailed User’s Manual for realme Watch S2 Table of contents 1. Getting Started ........................3 1.1 Wearing the watch ......................
⚫ User scans the QR code for pairing: From the software store, search “realme Link”, download and install the realme Link APP, or update the existing realme Link APP on your phone to the latest version; Activate the realme Link APP, register an account and log in, and enable the APP-related permissions based on the pop-up prompts.
Page 4
Open the realme Link APP, register an account and log in, and follow the pop-up prompts to enable App- related permissions. click home - > Add device- > Select manual pairing device below the scanning interface- > Click realme Watch S2 , the App automatically searches for the Bluetooth device name of the watch and lists it.
ESCRIPTION ⚫ It is recommended that the included dedicated charging cable and a realme charger with a rated output voltage of 5V and a rated output current of 0.5A be used to charge the watch.
Page 6
ESCRIPTION ⚫ Please charge your watch in a dry and well-ventilated environment. ⚫ Please dry the charging port before charging to avoid short circuit or other risks caused by dirty metal contacts or water ingress. ⚫ The charging interface and charging base need to be kept dry before charging, and be sure to wipe away water and sweat stains.
Page 7
Way 2: In the realme Link APP, you can check the battery power percentage at the device page 1.6 Watch buttons and screen control functions A color screen is used for the watch and it supports full-screen touch, swipe up, swipe down, left swipe, right swipe, and long press operations.
Page 8
Basic screen gestures Operation Functions Single Select OK click Long When the watch displays the dial interface, press and hold it to go to the press dial switching interface ; Swipe up View message notifications (swipe up on the dial interface) decline View the control cgo to (swipe down on the dial interface) Swipe left...
Page 9
Bluetooth. 1.8 Setting commonly used switches After the watch is successfully paired with the realme Link APP, you turn on the following switches to experience the corresponding functions provided by the device from the -> Health Reminder "...
Updating the watch version: The watch and mobile phone are connected normally through the realme Link APP. Please select "Device Upgrade " from the realme Link APP device page, and the version update package will be automatically detected. When there is an update package, the interface will prompt "Start Upgrading". Click to update. If the watch’s power is low, place the watch on the charging base and charge it to more than 25%.
2.1 Message reminder and removal of messages Message reminder 1. After the watch is paired and connected with the realme Link APP, please click on "Sync Mobile Phone Notification" from the realme Link APP device page, turn on the "Sync Mobile Phone Notification"...
Page 12
2.2 Receiving calls using the watch Setting frequent contacts and emergency contacts functions 1. Open the realme Link APP device page and select "More -> Frequent Contacts". 2. On the "Frequent Contacts" settings page, you can add contacts, sort added contacts, delete added contacts, and set emergency contacts.
1. Open the realme Link APP device page and find the music control switch to turn on/off the watch music control function . 2. In addition, you can also download music to the watch through the realme Link APP , and the watch can play the music transferred from the App.
Description ⚫ The weather function needs to be connected to the realme Link APP, and make sure the GPS is enabled on the phone , and the realme Link APP allowed to obtain location information.
Page 15
2.8 Timer 1. Click on the button to go to the application list and click "Timer". The watch provides you with 6 countdowns by default, 1 minute, 3 minutes, 5 minutes, 10 minutes, 30 minutes , and 1 hour. You can choose the appropriate time according to different scenarios. 2.
2.10 World Clock You can check the time of your city on the watch, and set the time of other cities in other countries to be displayed on the watch through the realme Link App . 2.10 Flashlight 1. Swipe down on the dial interface to open the control center, and you can directly tap "Flashlight"...
AI model will respond to the conversation based on the voice content. Description ⚫ During operation, realme Link and BT need to be connected to the watch. 2.15 Power saving mode From the power-saving mode, the watch only displays the time, date and battery information.
2.17 Event Reminder You can set event reminders in the realme Link App, edit event content, reminder time, and reminder cycle. After setting, save it to the watch side synchronously, and the watch will automatically pop up a window to remind you when the reminder time comes.
Page 19
4. After an exercise, you can click on "Exercise Record" in the application list to view the detailed exercise record. You can also view it in realme Link APP -> "Health" -> "Exercise Record" . Description ⚫...
The watch is provided with a wrist-type optical heart rate sensor that supports 24-hour continuous monitoring and recording of your heart rates (needs to be opened on the realme Link APP "Heart rate monitoring" switch) to help you keep healthy in a scientific manner.
Page 21
2. Heart rate is monitored once every 1 second during exercise. It takes 10 to 15 seconds to measure the first value at the beginning. 3. You can view the heart rate graph on the watch "Heart Rate " or on the realme Link APP. Rest heart rate warning The watch will automatically inform you when it detects that your heart rate is out of the set range when you are at rest.
Page 22
⚫ From the realme Link APP", turn on the 24-hour heart rate monitoring" switch, before the quiet heart rate warning can be enabled. ⚫ Rest heart rate refers to the heart rate measured when you are at rest, inactive, and not sleeping, and it can indicate the health of your heart.
Page 23
"Sleep" to view sleep data. Swipe up the screen to view deep sleep, light sleep, wakefulness, and REM duration. 2. Historical sleep data can be viewed in the realme Link APP. Please click on realme Link APP -> "Health" and select "Sleep" to display historical data, with statistical data by day, week, month, and year.
Page 24
4.6 Body energy When the realme Link App is set to detect body energy, the watch will calculate your body energy value based on your activities while wearing the watch. You can go to the Body Energy from the App list to check your body energy.
4.7 Ambient volume When realme Link is set to monitor the ambient volume throughout the day, the watch will measure the ambient volume every 15 minutes. You can also go to the ambient volume through the app list to detect the current surrounding noise.
Page 26
1. From the realme Link APP device page, select "Health Reminder" and turn on the "Water Drinking Reminder" switch. 2. Click on the reminder period menu to set the starting\ending time. 3. Click on the reminder interval menu to set the interval time. After setting, during the reminder period, the watch will remind you of drinking water at corresponding intervals.
Need help?
Do you have a question about the Watch S2 and is the answer not in the manual?
Questions and answers
rfr yf xfcf[ yfcnhjbnm dhtvz