Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for LumiRing AIR-D
- Page 1 December 2023 Fw 1.106 MANUAL DESKTOP READER/ENCODER AIR-D...
-
Page 2: Table Of Contents
Contents Introduction Description Specifications Default Settings Device Dimensions Device Appearance Connecting to Device Read Mode Encrypt Mode Restore Mode System Network Maintenance For Notes AIR-D... -
Page 3: Introduction
Description The AIR-D desktop RFID personalizer is an essential element for an access control system with a large number of users. It provides a convenient way to add identifiers to the system, and it protects identifiers from unauthorized copying by securely encrypting the available memory... -
Page 4: Specifications
AP Wi-Fi IP address of the device 192.168.4.1 • AP Wi-Fi password (default) none • Login admin • Password admin • RFID 125 kHz Enabled • RFID 13.56 MHZ Enabled • Work mode Reads • AP Wi-Fi timer 30 minutes AIR-D... -
Page 5: Device Dimensions
Device Dimensions RFID CARD 125, 65535 3.375" AIR-D... -
Page 6: Device Appearance
Device Appearance The manufacturer reserves the right to modify the external pin assignments and their placement, as well as the appearance of the device without prior notice. These changes may be made to improve functionality or ergonomics, or to comply with technical requirements and standards. -
Page 7: Connecting To Device
Step 3. Enter the AP Wi-Fi IP address of the device (192.168.4.1) in the address bar of your browser and press Enter. Step 4. After the page loads, enter your login and password. After login, the browser will redirect you to the Identifications Read Mode page. AIR-D... -
Page 8: Read Mode
Click the Update button to apply all settings. Note: The distance from which the ID can be read depends on the type and size of the built-in antenna. It is recommended to keep the IDs at a sufficient distance from the device to avoid reading errors. AIR-D... -
Page 9: Encrypt Mode
"Failure" and the device indication will turn red. Note: The encryption process may take longer than an average reading. Wait to remove the attached ID until the encryption process is complete to avoid data transmission errors and prevent data damage. AIR-D... -
Page 10: Restore Mode
Note: The ID recovery process may take longer than an average reading. When attaching the ID to the device, do not remove it until the recovery procedure is complete to avoid corrupting the transmitted data and prevent the ID from malfunctioning. AIR-D... -
Page 11: System
◦ Application programming interface ◦ The Network subsection displays the: (API) version used by the device. Device’s current network settings. ◦ Device’s network address. ◦ Network mode - Manual or Dynamic ◦ Host Configuration Protocol (DHCP). Network mask. ◦ AIR-D... -
Page 12: Network
AP availability time from 1 to 60 network settings yourself. minutes. Click the Update button to apply the HTTP port: By default, the device uses ◦ ◦ settings. port 80. Note: A reboot may be required to apply the network settings. AIR-D... -
Page 13: Maintenance
Apply the changes by pressing Update. interruption during the update may cause a firmware update application error. The new password can be used the next time If this happens, disconnect power from the you log in to the device interface. AIR-D... -
Page 14: For Notes
For notes AIR-D...
Need help?
Do you have a question about the AIR-D and is the answer not in the manual?
Questions and answers