Summary of Contents for ALFAtron ALF-IPCON-HDMI
- Page 1 ALFATRON ELECTRONICS GmbH GERMANY ALF-IPCON-HDMI PTZ CONTROLLER...
-
Page 2: Fcc Statement
ALF-IPCON-HDMI Preface Read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different model and specifications are subject to the real product. This manual is only for operation instruction, not for any maintenance usage. - Page 3 ALF-IPCON-HDMI necessary to correct the interference Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate the equipment. Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices.
-
Page 4: Important Safety Instructions
ALF-IPCON-HDMI Important Safety Instructions Do not expose this device to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the device. Do not install or place this unit in a bookcase, built-in cabinet, or in another confined ... - Page 5 ALF-IPCON-HDMI 1. Introduction The ALF-IPCON-HDMI can connect up to 255 cameras via either analog mode or network mode. It supports various control protocols, allowing each numbered camera to independently set its control protocol, such as network protocols: Onvif; Visca over IP (UDP);...
-
Page 6: Package Contents
ALF-IPCON-HDMI 3. Package Contents 1 × ALF-IPCON-HDMI 1 × 12V 1A power adapter. 1 × Certificate of Compliance 1 × Warranty Card 1 × User Manual 4. Specifications Technical Main control chip HiSilicon 3536DV100 Operating System Linux Audio feedback Key press sound indication on/off Interfaces RS422, RS232, RJ45, HDMI, USB, DC12V. -
Page 7: Operation Controls And Functions
ALF-IPCON-HDMI 5. Operation Controls and Functions Key panel / Main panel Name Function Description Single-click the button to enter multiplexing functions: indoor white balance, outdoor WHITE BALANCE white balance, manual white balance, and one-touch white balance mode. CYCLE Press the button to directly select the automatic white AUTO WHITE balance. - Page 8 ALF-IPCON-HDMI Zoom speed - : Click to reduce the camera's zoom ZOOM SPEED speed. DOWN Zoom speed + : Click to accelerate the camera's zoom ZOOM SPEED speed. BACKLIGHT Backlight switch: Click to toggle the camera's backlight mode. ON/OFF FOCUS...
-
Page 9: Settings Page
ALF-IPCON-HDMI 5.2 Settings Page - 5 / 22 -... - Page 10 ALF-IPCON-HDMI 5.3 Knob & Joystick Description (1) [PAN/TILT SPEED/PERSET SPEED]Pan/tilt speed/preset position rotation speed: Turn the knob to the right to increase speed, turn it to the left to decrease speed, press the knob to switch speed type; (2) [R.GAIN/B.GAIN] Red and blue gain: Turn the knob to the right to increase gain, turn it to the left to decrease gain, press the knob to switch gain type;...
- Page 11 ALF-IPCON-HDMI Function Description POWER Power on/off Standard 5.5/2.1 power connector, DC 12V1A ±10%. DC12V For keyboard upgrade use HDMI video output. During video transmission control of compatible network cameras, the controller’s HDMI OUT HDMI interface connects to an HDMI cable for real-time output...
- Page 12 ALF-IPCON-HDMI 6. Device connection & usage 6.1 Network Mode Network VISCA over IP, ONVIF Camera Connection Diagram The keyboard and the PTZ camera must be connected within the same local area network, ensuring that the IP addresses are in the same subnet. For example, 192.168.1.123 and 192.168.1.111 belong to the same subnet,...
- Page 13 ALF-IPCON-HDMI 6.2 RS485 connection Analog mode RS485 dome camera connection diagram. Analog mode RS422 control camera connection diagram - 9 / 20 -...
- Page 14 ALF-IPCON-HDMI (1) Using the RS422 bus connection method, the third pin Ra of the control keyboard is connected to the TXD IN- of the camera, the fourth pin Rb of the keyboard is connected to the TXD IN+ of the camera, the first...
-
Page 15: Equipment Operation
ALF-IPCON-HDMI 7. Equipment Operation 7.1 Adding a Network Device The operation of adding a network camera device using the controller is as follows: (1) Click "SETUP" on the keyboard to enter the main menu. (2) Click Add Network Device, fill in the... - Page 16 ALF-IPCON-HDMI 7.2 Adding a Analog Device (1) Press and hold the middle button on the joystick to switch to Analog mode. (2) Press the SETUP button to enter the setup interface,and select Add Analog Device. (3) Enter the device adding interface,...
-
Page 17: Network Configuration
ALF-IPCON-HDMI (2) Use the joystick to view the saved devices, press the middle button on the joystick or the [ENTER] key to select the camera you want to control. (3) When the screen displays "Connected successfully", it means the keyboard has been connected to the IP device. - Page 18 ALF-IPCON-HDMI (2) Default username: admin; Password: blank (3) After entering the device web client, the page is displayed as follows: (4) After entering the device homepage, you can view the device parameter details and modify them. (5) Click the "...
-
Page 19: System Upgrade
ALF-IPCON-HDMI 8.2 WEB network settings The LAN settings can modify the device's IP acquisition method and port parameters, as shown below: Static address (STATIC): When the user needs to set the network segment by himself, change the network type to static address and fill in the network segment information that needs to be modified. -
Page 20: System Reset
ALF-IPCON-HDMI 8.4 System Reset When you click on device reset, the keyboard will clear all data, so please be careful! 8.5 System Restart When the device needs to be restarted for maintenance after being used for a long time, click Restart to achieve the purpose of restarting for maintenance. -
Page 21: Export Configuration
ALF-IPCON-HDMI 8.6 Export Configuration Export the information about adding multiple devices to the current keyboard, which can be exported to other keyboard devices for use. 8.7 Import Configuration Import the device information of the previous keyboard (for example, when adding multiple devices to the keyboard, export the file type, and import it to another device when adding a new keyboard.) -
Page 22: Joystick Calibration
ALF-IPCON-HDMI 8.8 Joystick Calibration During long-term use, the joystick may become inaccurate due to aging. You can recalibrate the joystick through the joystick calibration page to extend its service life. 8.9 Version Information During long-term use, the joystick may become inaccurate due to aging. -
Page 23: Warranty
ALF-IPCON-HDMI Warranty 1.1 This limited warranty covers defects in materials and workmanship in this product. 1.2 Should warranty service be required, proof of purchase must be presented to the Company. The serial number on the product must be clearly visible and not have been tampered with in any way whatsoever. - Page 24 ALF-IPCON-HDMI 1.10.3 Issue a ref und of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty. 1.11 The Company is not obligated to provide the Customer with a substitute unit during the limited warranty period or at any time thereafter.
Need help?
Do you have a question about the ALF-IPCON-HDMI and is the answer not in the manual?
Questions and answers