Related Manuals for SGS STC7200TBPRO
Summary of Contents for SGS STC7200TBPRO
- Page 1 STC7200TBPRO 72” TOOL CHEST & ROLLER CABINET OWNER’S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.
-
Page 2: Safety Rules And Precautions
LUBRICATE THE TOP AND BOTTOM CHANNELS OF THE DRAWER Cabinet 907283 Caster Washer 907293 Power Strip 907284 Handle Bolt 907294 SLIDES AT LEAST TWICE A YEAR. Rubber Grommet 907285 Storage Hook Bolt 907295 Cabinet Handle 907286 Bracket Bolt 907296 Storage Hook 907287 WWW.SGS-ENGINEERING.COM PAGE 2 PAGE 3... - Page 3 • Position the side handle on the side of the tool chest and panel of the cabinet. attach with bolts and washers. • Repeat the process for the second handle on the opposite side panel. WWW.SGS-ENGINEERING.COM PAGE 4 PAGE 5...
-
Page 4: Removing The Drawers
• Depending on the slide, either lift or lower the release lever on both sides so the slides can ride over the stops. • Pull the drawer outward until it releases from the drawer slide. WWW.SGS-ENGINEERING.COM PAGE 6 PAGE 7... -
Page 5: Maintenance
To help protect the powder coated finish, do not allow harsh chemicals (oil, grease or other chemicals) to remain on the powder coated surface. • Use a glass cleaner (Windex or equivalent product) to clean and maintain all surfaces of powder coating. WWW.SGS-ENGINEERING.COM PAGE 8 PAGE 9... - Page 6 2. To reassemble: Insert the end of the inner drawer slide into the middle drawer and slide fully into place. WWW.SGS-ENGINEERING.COM PAGE 10 PAGE 11...
- Page 7 SGS Engineering (UK) Ltd West Side Park Raynesway Derby, DE21 7AZ EC Declaration of Conformity This is an important document and should be retained MANUFACTURER’S NAME: SGS Engineering (UK) Ltd Tool Chest/Cabinet TYPE OF EQUIPMENT: STC7200TBPRO PART NUMBER: APPLICATION OF EC COUNCIL DIRECTIVES / STANDARD:...
Need help?
Do you have a question about the STC7200TBPRO and is the answer not in the manual?
Questions and answers