Related Manuals for SGS STC600
Summary of Contents for SGS STC600
- Page 1 SGS STC600 6-PIECE GARAGE STORAGE SYSTEM OWNER’S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.
- Page 2 When you open the cartons, carefully check the contents and make sure there is no damage. If you have any problems or you find any parts dam- aged or missing, please contact us first at support@sgs-engineering.com Do not return the product to the store before contacting us. Do not...
-
Page 3: Hardware Included
Locker x 1 Wall cabinet x 2 Casters M8 x 20 Hex Flange Bolt Grab Handle M8 x 16 Flat-Head Bolt M8 x 65 Hex Bolt M8 Hex Flange Nut Shelf to connect wall cabinets x 4 WWW.SGS-ENGINEERING.COM PAGE 4 PAGE 5... -
Page 4: Installing The Handles
Mount four casters to each cabinet with sixteen M8x20 hex flange bolts. Note: The casters with brakes should be on the front side of the cabinet. No. 9 x 4 each Casters No. 10 x 16 each M8 x 20mm Hex Flange Bolt WWW.SGS-ENGINEERING.COM PAGE 6 PAGE 7... -
Page 5: Installing The Feet
Check the location need, then carefully put the shelf into the slot. Please make sure the shelf is stable. NOTE: A centre shelf must be installed level with the lock on the cabinet door in order for lock to work. No. 8 Shelf WWW.SGS-ENGINEERING.COM PAGE 8 PAGE 9... - Page 6 No. 2 x 4 each Flat washer No. 4 x 4 each M5x50mm Hex Tapping bolt 3. Connect the two wall cabinets with shelves No. 1 x 16 M6 Hex Flange Nut No. 5 x 16 M6x12mm Flat-Head Bolt WWW.SGS-ENGINEERING.COM PAGE 10 PAGE 11...
-
Page 7: Maintenance
2. Periodically clean the drawers’ fronts, doors, handles and other surfaces. 3. For safety, use a non-flammable cleaning fluid. Grease and oil can be removed with most standard cleaning fluids. WWW.SGS-ENGINEERING.COM PAGE 12 PAGE 13...
Need help?
Do you have a question about the STC600 and is the answer not in the manual?
Questions and answers