Advertisement

Techniczny Certyfikat wsparcia i e-gwarancji
www.vevor.com/support
PRZECHOWYWANIE PLANÓW
MODEL: KLLT-01
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KLLT-01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VEVOR KLLT-01

  • Page 1 Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.com/support PRZECHOWYWANIE PLANÓW MODEL: KLLT-01 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 3 2. Podczas używania proszę najpierw przeczytać niniejszą instrukcję. Zaleca się zachowanie jej do późniejszego użycia. PRODUCT DESCRIPTION Model KLLT-01 Kolor Czarny biały​ Materiał C hipboard i MDF Tablica Liczba gniazd 50 slotów...
  • Page 4: Part List

    PART LIST - 3 -...
  • Page 5 ASSEMBLY INSTRUCTIONS Rozpakuj i wyjmij część magazynu planów oraz pakiet akcesoriów Screw . Krok 1: Najpierw umieść płytę przednią ( ②) i tylną część ( ①) na płycie podstawy (⑤) za pomocą śrub „trzy w jednym” ( A\B) i listwy (C). - 4 -...
  • Page 6 Krok 2: Załóż panel boczny (③\④) NA dwie strony za pomocą śrub „trzy w jednym” (A\B) i listwy (C). - 5 -...
  • Page 7 Krok 3: Załóż uchwyt (G) NA dwie strony. - 6 -...
  • Page 8 Krok 4: Połóż produkt na boku wzdłuż tylnego panelu (①) i zamontuj koła (E/F) na płycie podstawy (⑤) za pomocą śrub (D). - 7 -...
  • Page 9 Krok 5: Umieść przegrodę (⑥~⑨) do wewnątrz . - 8 -...
  • Page 10 Krok 5: Zamontuj listwę dekoracyjną (H) na ściance działowej (⑩x9), a następnie umieść je na półce . - 9 -...
  • Page 11 Krok 5: Zamontuj listwę dekoracyjną (I) na ściance działowej (⑥~⑨), a na koniec przyklej naklejki (J) do otworów na śruby (B). - 10 -...
  • Page 12 Import do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. C/0 YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.com/support...
  • Page 13 Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support ARCHIVIAZIONE DEL PROGETTO MODELLO: KLLT-01 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 14 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 15: Warning And Precautions

    2、 Durante l'utilizzo, leggere prima questo manuale e si consiglia di conservarlo con cura per una visione successiva. PRODUCT DESCRIPTION Modello KLLT-01 Colore Nero bianco​ Pannello laterale C e MDF Asse Materiale Numero di slot...
  • Page 16 PART LIST - 3 -...
  • Page 17 ASSEMBLY INSTRUCTIONS - 4 -...
  • Page 18 Disimballare ed estrarre la parte di archiviazione del progetto e un pacchetto di accessori per viti . Passaggio 1: innanzitutto, posizionare la piastra anteriore (②) e la piastra posteriore ( ① ) sulla piastra di base (⑤) con le viti tre in uno (A\B) e il listello (C).
  • Page 19 Passaggio 2: posizionare il pannello laterale (③\④) SU due lati con viti Tre in uno (A\B) e listello (C). - 6 -...
  • Page 20 Passaggio 3: posizionare la maniglia (G) SU due lati. - 7 -...
  • Page 21 Passaggio 4: posizionare il prodotto su un lato lungo il pannello posteriore (①) e installare le ruote (E/F) sulla piastra di base (⑤) con le viti (D). - 8 -...
  • Page 22 Passaggio 5: posizionare la partizione (⑥~⑨) verso l'interno . - 9 -...
  • Page 23 Passaggio 5: installare la striscia decorativa (H) sulla partizione (⑩x9), quindi posizionarla sullo scaffale . - 10 -...
  • Page 24 Passo 5: Installa la striscia decorativa (I) sulla partizione (⑥~⑨) e, infine, attacca gli adesivi (J) sui fori delle viti (B). - 11 -...
  • Page 25 Importato negli Stati Uniti: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. C/0 YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support...
  • Page 26 Technique Assistance et certificat de garantie électronique www.vevor.com/support STOCKAGE DES PLANS MODÈLE : KLLT-01 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 27 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 28: Warning And Precautions

    à deux personnes pour vous aider à l'installation. 2. Lors de l'utilisation, veuillez d'abord lire ce manuel et il est recommandé de bien le conserver pour une utilisation ultérieure. PRODUCT DESCRIPTION Modèle KLLT-01 Couleur Noir blanc​ Matériel Panneaux de particules et MDF Conseil Nombre...
  • Page 29: Part List

    PART LIST - 3 -...
  • Page 30 ASSEMBLY INSTRUCTIONS Déballez et sortez la partie de stockage des plans et un lot d' accessoires de vis . Étape 1 : Tout d'abord, placez la plaque avant (②) et la plaque arrière ( ① ) sur la plaque de base (⑤) avec des vis trois en un (A\B) et la latte (C).
  • Page 31 Étape 2 : Placez le panneau latéral (③\④) sur deux côtés avec vis trois en un (A\B) et latte (C). - 5 -...
  • Page 32 Étape 3 : Mettez la poignée (G) sur deux côtés. - 6 -...
  • Page 33 Étape 4 : Placez le produit sur le côté le long du panneau arrière (①) et installez les roues (E/F) sur la plaque de base (⑤) avec les vis (D). - 7 -...
  • Page 34 Étape 5 : Placez la cloison (⑥~⑨) vers l'intérieur . - 8 -...
  • Page 35 Étape 5 : Installez la bande décorative (H) sur la cloison (⑩x9), puis posez-les sur l'étagère . - 9 -...
  • Page 36 Étape 5 : Installez la bande décorative (I) sur la cloison (⑥~⑨), et enfin collez les autocollants (J) sur les trous de vis (B). - 10 -...
  • Page 37 Importé aux États-Unis : Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. C/0 YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Technique Assistance et certificat de garantie électronique www.vevor.com/support...
  • Page 38 Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support BLAUWDRUKOPSLAG MODEL: KLLT-01 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 39 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 40 2. Lees bij gebruik eerst deze handleiding en het wordt aanbevolen om deze goed te bewaren zodat u deze later kunt bekijken. PRODUCT DESCRIPTION Model KLLT-01 Kleur Zwart wit​ Materiaal C heupplaat & MDF Bord Aantal slots...
  • Page 41 PART LIST - 3 -...
  • Page 42 ASSEMBLY INSTRUCTIONS het deel van de blauwdrukopslag en een bundel met schroefaccessoires uit en haal het eruit . Stap 1: Plaats eerst de voorplaat (②) en achterplaat ( ①) op de grondplaat ( ⑤) met drie-in-één schroeven (A\B ) en lat (C). - 4 -...
  • Page 43 Stap 2: Zijpaneel plaatsen (③\④) op twee kanten met drie-in-één schroeven (A\B) en lat (C). - 5 -...
  • Page 44 Stap 3: Handgreep plaatsen (G) op twee kanten. - 6 -...
  • Page 45 Stap 4: Plaats het product op zijn kant langs het achterpaneel (①) en installeer de wielen (E/F) op de grondplaat (⑤) met schroeven (D). - 7 -...
  • Page 46 Stap 5: Plaats het tussenschot (⑥~⑨) naar binnen . - 8 -...
  • Page 47 Stap 5: Installeer de sierstrip (H) op de scheidingswand (⑩x9) en plaats ze vervolgens op de plank . - 9 -...
  • Page 48 Stap 5: Installeer de sierstrip (I) op de scheidingswand (⑥~⑨) en plak tenslotte de stickers (J) op de schroefgaten (B). - 10 -...
  • Page 49 Geïmporteerd naar de VS: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. C/0 YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support...
  • Page 50 Técnico Certificado de soporte y garantía electrónica www.vevor.com/support ALMACENAMIENTO DE PLANOS MODELO: KLLT-01 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 51 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 52 2. Cuando lo utilice, lea primero este manual y se recomienda conservarlo en buen estado para poder verlo en el futuro. PRODUCT DESCRIPTION Modelo KLLT-01 Color Blanco negro​ Tablero de chimenea y MDF Junta Material Número de...
  • Page 53 PART LIST - 3 -...
  • Page 54 ASSEMBLY INSTRUCTIONS Desempaque y saque la parte de almacenamiento de planos y un paquete de accesorios para tornillos . Paso 1: En primer lugar, coloque la placa frontal (②) y la placa trasera ( ① ) en la placa base (⑤) con tornillos tres en uno (A\B) y listón (C). - 4 -...
  • Page 55 Paso 2: Coloque el panel lateral (③\④) en dos lados con tornillos tres en uno (A\B) y listón (C). - 5 -...
  • Page 56 Paso 3: Poner manija (G) en dos lados. - 6 -...
  • Page 57 Paso 4: Coloque el producto de lado a lo largo del panel posterior (①) e instale las ruedas (E/F) en la placa base (⑤) con tornillos (D). - 7 -...
  • Page 58 Paso 5: Coloque la partición (⑥~⑨) hacia adentro . - 8 -...
  • Page 59 Paso 5: Instale la tira decorativa (H) en la partición (⑩x9) y luego colóquela en el estante . - 9 -...
  • Page 60 Paso 5: Instale la tira decorativa (I) en la partición (⑥~⑨) y, finalmente, pegue las pegatinas (J) en los orificios para tornillos (B). - 10 -...
  • Page 61 Importado a EE. UU.: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. C/0 YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Técnico Certificado de soporte y garantía electrónica www.vevor.com/support...
  • Page 62 Teknisk Support och e-garanticertifikat www.vevor.com/support BLUEPRINT LAGRING MODELL: KLLT-01 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 63 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 64 2、 När du använder, läs den här bruksanvisningen först, och det rekommenderas att du förvarar den väl för efterföljande användning. PRODUCT DESCRIPTION Modell KLLT-01 Färg Svart vit​ C hipboard & MDF Styrelse Material...
  • Page 65 PART LIST - 3 -...
  • Page 66 ASSEMBLY INSTRUCTIONS Packa upp och ta ut delen av ritningsförvaringen och ett paket med skruvtillbehör . Steg 1: Sätt först framplåten (②) och bakplåten ( ①) på bottenplattan ( ⑤) med tre-i-ett-skruvar ( A\B ) och läkt (C). - 4 -...
  • Page 67 Steg 2: Sätt på sidopanelen (③\④) på två sidor med tre-i-ett-skruvar (A\B) och läkt (C). - 5 -...
  • Page 68 Steg 3: Sätt på handtaget (G) på två sidor. - 6 -...
  • Page 69 Steg 4: Placera produkten på sidan längs bakpanelen (①) och installera hjulen (E/F) på bottenplattan (⑤) med skruvar (D). - 7 -...
  • Page 70 Steg 5: Placera partitionen (⑥~⑨) inåt . - 8 -...
  • Page 71 Steg 5: Installera den dekorativa remsan (H) på mellanväggen (⑩x9), och lägg dem sedan på hyllan . - 9 -...
  • Page 72 Steg 5: Montera den dekorativa remsan (I) på skiljeväggen (⑥~⑨), och, slutligen, fäst klistermärkena (J) på skruvhålen (B). - 10 -...
  • Page 73 Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. C/0 YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Teknisk Support och e-garanticertifikat www.vevor.com/support...
  • Page 74 Technisch Support- und E-Garantiezertifikat www.vevor.com/support BLUEPRINT-SPEICHER MODELL: KLLT-01 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 75 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 76 2、 Bitte lesen Sie vor der Verwendung dieses Handbuchs zuerst. Es wird empfohlen, es gut aufzubewahren, damit Sie es bei späterer Verwendung einsehen können. PRODUCT DESCRIPTION Modell KLLT-01 Farbe Schwarz - Weiss Material C- Hipboard und MDF Planke Anzahl der 50 Plätze...
  • Page 77 PART LIST - 3 -...
  • Page 78 ASSEMBLY INSTRUCTIONS - 4 -...
  • Page 79 den Teil der Blaupausenaufbewahrung und ein Bündel Schraubenzubehör aus und nehmen Sie sie heraus . Schritt 1: Setzen Sie zunächst die Frontplatte (②) und die Rückplatte ( ① ) mit Drei-in-Eins-Schrauben (A\B) und der Latte (C) auf die Grundplatte (⑤) . - 5 -...
  • Page 80 Schritt 2: Seitenteil anbringen (③\④) An zwei Seiten mit 3-in-1-Schrauben (A\B) und Latte (C). - 6 -...
  • Page 81 Schritt 3: Griff (G) anbringen An zwei Seiten. - 7 -...
  • Page 82 Schritt 4: Legen Sie das Produkt seitlich entlang der Rückwand (①) und montieren Sie die Räder (E/F) mit Schrauben (D) an der Grundplatte (⑤) . - 8 -...
  • Page 83 Schritt 5: Platzieren Sie die Trennwand (⑥~⑨) nach innen . - 9 -...
  • Page 84 Schritt 5: Installieren Sie den Zierstreifen (H) an der Trennwand (⑩x9) und legen Sie ihn dann auf das Regal . - 10 -...
  • Page 85 Schritt 5: Bringen Sie den Zierstreifen (I) an der Trennwand (⑥~⑨) an und kleben Sie abschließend die Aufkleber (J) auf die Schraubenlöcher (B). - 11 -...
  • Page 86 - 12 -...
  • Page 87 In die USA importiert: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. C/0 YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Technisch Support- und E-Garantiezertifikat www.vevor.com/support...

Table of Contents