Vestil MT Series Operation Instructions Manual

Mechanical post tables

Advertisement

TABLE OF CONTENTS
MT-SERIES MECHANICAL POST TABLES
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Specifications............................................................................................................................
Signal
Words.............................................................................................................................
Safety
Instructions.....................................................................................................................
Exploded Views and Bills of
Assembling the Post
Table..........................................................................................................
Using the Post
Table.....................................................................................................................
Record of Satisfactory
Condition................................................................................................
Inspecting & Maintaining the Post
Labeling
Diagram...................................................................................................................................
Limited
Warranty........................................................................................................................
TABLE OF CONTENTS
Rev. 10/28/2024
VESTIL MANUFACTURING COMPANY
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
www.vestil.com
https://www.vestil.com/page-parts-request.php
Table of Contents
Materials...........................................................................................................
Table...................................................................................
Copyright 2024 Vestil Manufacturing Co.
Fax: (260) 665-1339
Email:
info@vestil.com
https://www.vestil.com/page-
MT, MANUAL 1024
.
Page
2
3
3
4 - 9
10
10 - 11
11
11 - 12
13
14
Page 1 of 14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MT Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vestil MT Series

  • Page 1 Assembling the Post Table…………………………………………………………..……………………………….. Using the Post Table……...…………...……………………………………………………………………….… 10 - 11 Record of Satisfactory Condition…………………………………………………………………………………… Inspecting & Maintaining the Post Table….…….…………………………………………………………...… 11 - 12 Labeling Diagram……………………………....................Limited Warranty…………………..……………………………………………………………………………...….… TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 1 of 14...
  • Page 2: Specifications

    TABLE OF CONTENTS Rev. 10/28/2024 MT, MANUAL 1024 SPECIFICATIONS Specifications documents for MT-series mechanical post tables are provided on Vestil’s website. To access appropriate specifications document, navigate this webpage: https://www.vestil.com/product.php?FID=282 . Click the “Product Specifications Table” drop-down menu bar partway down the page. Scroll down to the entry for the model you purchased and click the button in the column titled “PDF’s”...
  • Page 3: Signal Words

    SAFETY INSTRUCTIONS Vestil strives to identify foreseeable hazards associated with the use of its products, but no manual can address every conceivable risk. Reduce risk by applying sound judgment whenever using this device. Keep a copy of this manual either in a location accessible and known to all users or with the table, e.g.
  • Page 4 HHCS #2 Z Plated, GRADE A, Ø1/2 - 13 x 1 1/4 LG 36110 HEX NUT Z-PLATED, GRADE A, Ø 1/2 - 13 33012 FLAT WASHER, LOW CARBON, ZINC FINISH, 1/2" 65076 Ø1/8" X 1" COTTER PIN, Z-PLATED TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 4 of 14...
  • Page 5 HHCS #2 Z Plated, GRADE A, Ø1/2 - 13 x 1 1/4 LG 36110 HEX NUT Z-PLATED, GRADE A, Ø 1/2 - 13 33012 FLAT WASHER, LOW CARBON, ZINC FINISH, 1/2" 65076 Ø1/8" X 1" COTTER PIN, Z-PLATED TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 5 of 14...
  • Page 6 HHCS #2 Z Plated, GRADE A, Ø1/2 - 13 x 1 1/4 LG 36110 HEX NUT Z-PLATED, GRADE A, Ø 1/2 - 13 33012 FLAT WASHER, LOW CARBON, ZINC FINISH, 1/2" 65076 Ø1/8" X 1" COTTER PIN, Z-PLATED TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 6 of 14...
  • Page 7 HHCS #2 Z Plated, GRADE A, Ø1/2 - 13 x 1 1/4 LG 36110 HEX NUT Z-PLATED, GRADE A, Ø 1/2 - 13 33012 FLAT WASHER, LOW CARBON, ZINC FINISH, 1/2" 65076 Ø1/8" X 1" COTTER PIN, Z-PLATED TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 7 of 14...
  • Page 8 HHCS #2 Z Plated, GRADE A, Ø1/2 - 13 x 1 1/4 LG 36110 HEX NUT Z-PLATED, GRADE A, Ø 1/2 - 13 33012 FLAT WASHER, LOW CARBON, ZINC FINISH, 1/2" 65076 Ø1/8" X 1" COTTER PIN, Z-PLATED TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 8 of 14...
  • Page 9 HHCS #2 Z Plated, GRADE A, Ø1/2 - 13 x 1 1/4 LG 36110 HEX NUT Z-PLATED, GRADE A, Ø 1/2 - 13 33012 FLAT WASHER, LOW CARBON, ZINC FINISH, 1/2" 65076 Ø1/8" X 1" COTTER PIN, Z-PLATED TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 9 of 14...
  • Page 10 2 different speeds. Attaching the Swiveling Floor Lock handle to the large gear drive shaft on the left caster (as shown in the diagram) allows the tabletop TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 10 of 14...
  • Page 11 (without binding) and evenly. Inspect the gripper pad of the floor lock for tears, significant wear, and other forms of damage. Make sure that the floor lock operates TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 11 of 14...
  • Page 12  Confirm that each clevis pin is secured with a cotter pin.  Lubricate the chains as necessary to minimize resistance in the drive mechanism.  Apply touchup paint wherever the finish is damaged as soon as damage occurs. TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 12 of 14...
  • Page 13 (260) 665-7586 and asking for the TECHNICAL SERVICE & PARTS DEPARTMENT. A: Label 210 B: Label 1153 C: Label 212 D: Label 821 TABLE OF CONTENTS Copyright 2024 Vestil Manufacturing Co. Page 13 of 14...
  • Page 14: Limited Warranty

    The warranty period for original dynamic components is 1 year. For wearing parts, the warranty period is 90 days. Both warranty periods begin on the date Vestil ships the product to the Warrantee. If the product was purchased from an authorized distributor, the periods begin when the distributor ships the product.

Table of Contents