Page 1
WEIGHT INSTALLATION MANUAL DISTRIBUTION Level of Difficulty Display Photo (sign and product not included) Easy Parts List Item Qty Description Base Bottom post Extension post Right arm Left arm Coupler (25200) Header frame Support arm Leveler, 3/8"-16 x 1" Short screw, 5/16"-18 x 16mm Medium screw, 5/16"-18 x 1"...
Page 2
Step 1 Carefully unpack display and set over retail floor space designated for this display. NOTICE For uneven floors, adjust levelers (#9) on underside of base (#1), to produce a level base. Step 2 Install the bottom post (#2) to the base (#1). Secure together with (4) short 10 (qty 2) screws (#10) on bottom plate,...
Page 3
Step 4 Install a coupler (#6) and extension post (#3) to the bottom post (#2). Secure posts together with (2) short screws (#10). Figure 4. COUPLER 25200 10 (qty 2) Step 5 Install (3) medium screws (#11) through the extension post (#2), coupler (#6) and bottom post (#2) and secure with (3) nylock nuts (#13) on the underside of the coupler, as shown.
Page 4
Step 6 Install the support arm (#8) to the base (#1) and extension post (#3). Secure to the base with (2) long screws (#12). Secure to the extension post (#3) with (4) short screws (#10). 10 (qty 4) 12 (qty 2) Step 7 Repeat process to install the second extension post (#3), arms (#4 &...
Page 5
Step 8 - Installing Weight Distribution Product Support brackets Two people required to install hitch. Secure ball Install support brackets to arms (#4 & #5), as shown. Person 1: Carefully hold the front end and install the ball hitch through the ball-end of coupler and secure through latch with safety pin.
Need help?
Do you have a question about the CURT 99441 and is the answer not in the manual?
Questions and answers