• PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE. • Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
Adjusting the OSD settings NOTE: The following content is for general reference only. Actual product specifications may vary. The OSD (on-screen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings.
Selecting the Input Open the Input control and select an available input source. When you are done, use to go back one level. The Function page Open the Function page to select a menu function, and adjust the settings which you want using the arrows. You can also view your monitor’s system information from this page.
Page 5
Color Press the MENU key to open the OSD. Using the keys, select Color from the OSD. Then navigate to the setting you wish to adjust. ▲ ▼ Use the / keys to select the setting. Gamma mode allows you to adjust the luminance tone. The default value is 2.2 (standard value for Windows). Color temperature: Default is warm.
Page 6
Audio Press the MENU key to open the OSD. Using the keys, select Audio from the OSD. Then navigate to the setting you wish to adjust. ▲ ▼ Use the / keys to adjust any sliding scales. Volume: Adjust the volume. Gaming Press the MENU key to open the OSD.
Page 7
Press the MENU key to open the OSD. Using the keys, select OSD from the OSD. Then navigate to the setting you wish to adjust. ▲ ▼ Use the / keys to adjust any sliding scales. Language: Set the OSD menu language. OSD Timeout: Adjust the delay before turning off the OSD menu.
Page 8
System Press the MENU key to open the OSD. Using the keys, select System from the OSD. Then navigate to the setting you wish to adjust. ▲ ▼ Use the / keys to select the setting. Input: Select the source from an available input source. Auto Source: Automatically searches for available input sources.
Product information Press the MENU key to open the OSD. Using the keys, select Information to view the basic information for your monitor and current input. ▲ ▼ Reset All Settings: Reset all settings to the factory defaults.
Standard timing table Mode Resolution Remark 640 x 480 60 Hz 640 x 480 66.66 Hz 720 x 400 70 Hz 800 x 600 56 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1024 x 768 70 Hz 1152 x 864 75 Hz 1280 x 1024...
CE declaration of Conformity Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
All specifications are subject to change without notice. Find manuals and other documents for your Acer product on the official Acer support website. *Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per year.
Need help?
Do you have a question about the XF250Q and is the answer not in the manual?
Questions and answers