AEG ID ARE H3.0 Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Scanner
  5. ID ARE H3.0
  6. Manual
AEG ID ARE H3.0 Manual

AEG ID ARE H3.0 Manual

Iso fdx-b reader
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Manual
ARE H3.0
AEG is a registered trademark used under license from AB Electrolux (publ)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ID ARE H3.0 and is the answer not in the manual?

Questions and answers

Summary of Contents for AEG ID ARE H3.0

  • Page 1 Manual ARE H3.0 AEG is a registered trademark used under license from AB Electrolux (publ)

  • Page 2: Table Of Contents

    Version: 1 Manual ARE H3.0 Manual V2 Page: 2 / 13 Introduction ............................3 ARE H3.0 ..............................3 Use Case ............................3 Functionality ........................... 4 General usage ..........................4 2.2.1 Power supply ..........................5 2.2.2 Interface ............................5 2.2.3 2.2.4 Options ............................6 Setup tool ............................

  • Page 3: Introduction

    Version: 1 Manual ARE H3.0 Manual V2 Page: 3 / 13 1. Introduction ARE H3.0 is a compact handheld ISO fdx-b reader. It reads ISO 11784/85 compatible transponders as well as ASK 64 bit transponders. In addition, the reader displays temperature if a temperature sensor is present in the transponder. Optionally programmed data are also displayed.

  • Page 4: Functionality

    Version: 1 Manual ARE H3.0 Manual V2 Page: 4 / 13 2.2 Functionality 2.2.1 General usage Reading a transponder Pressing the red button switches on the reader. Each subsequent press of the button triggers a read. The reader searches for a transponder for a preset time. Once the transponder is read, the ISO number together with retagging counter and user information field and temperature if present, is displayed.

  • Page 5: Power Supply

    ARE H3.0 sends the read data out of its serial interface. The format can be influenced. Please see section 2.2.5 for details. AEG ID PC program “ARE H3.0 setup tool” can be used to communicate to and setup ARE H3.0 reader. Please see section 2.2.5 for details.

  • Page 6: Options

    Data function Some AEG ID ISO 11784/85 transponders support 16 characters of ASCII data to be programmed into the chip. This data function can be used to write the telephone number of the pet owner into the chip. Alternatively the name of the animal or any other relevant data (e.g.

  • Page 7: Setup Tool

    Serial output string can be set acc. IS 24631-6 or can be customized. Please see section 2.2.5 for details. 2.2.5 Setup tool AEG ID PC program “AEG ID ARE H3.0 terminal” can be used to determine optional settings for the reader. Start the program by clicking on its icon. The program opens up.

  • Page 8: Terminal Function

    Version: 1 Manual ARE H3.0 Manual V2 Page: 8 / 13 Interface: Open the correct interface. Check in system settings which is the correct port. Serial parameters are 19.200 baud, 8 bits, 1 stop bit, no parity, no hardware control. Use config button to open serial settings.

  • Page 9: Temperature Settings

    Version: 1 Manual ARE H3.0 Manual V2 Page: 9 / 13 Data settings Checkbox “enable data” switches on data display capabilities of ARE H3.0 to display data in the second line of the display. Only valid data with correct checksum are displayed. Type in any combination of up to 16 alphanumeric characters in the edit field.
  • Page 10 Version: 1 Manual ARE H3.0 Manual V2 Page: 10 / 13 Switch off time setting Here you can determine the switch off time from 10 seconds (1) to 200 seconds (20). The edit field only accepts values from 1 to 20. Serial output string settings Select if you want to have the serial output according to ISO 24631-6 or if you want to customize the output by setting the corresponding radio button.
  • Page 11 Version: 1 Manual ARE H3.0 Manual V2 Page: 11 / 13 Custom serial output string: You can influence the serial output string. Please note you have to input the characters in hex format. pre characters You can add up to 6 ASCII characters in front of the string. Hex 00 will not be sent. Default is 0x000000000000. In this case nothing will be sent before the ISO number.

  • Page 12: Fcc Statement

    Version: 1 Manual ARE H3.0 Manual V2 Page: 12 / 13 3. FCC Statement 3.1 ARE H3.0 Valid for ARE H3.0 Federal Communications Commissions (FCC) Statement §15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
  • Page 13 AEG Identifikationssysteme GmbH Hörvelsinger Weg 47 89081 Ulm Tel.: +49 731 14 00 88 – 0 Email: sales@aegid.de Web: www.aegid.de AEG is a registered trademark used under license from AB Electrolux (publ)

Table of Contents