Download Print this page

FLAJZAR WRL-KEY Quick Start Manual

Saving the transmitter code in the lamp memory (pairing)

Advertisement

Quick Links

WRL-KEY allows simple remote control of our wireless lamps WRL1 and WRL2. Lamps can be switched ON or OFF at any time by
the WRL-KEY
Specifications
• Power: 3V battery CR2032
• Number of white LEDs: 3
• Dimensions: 59.2mm x 34.3mm x 12,
Saving the Transmitter Code in the Lamp Memory (Pairing)
•Press the button on the lamp and hold it for about 5 seconds until the red LED on the top flashes. The lamp switches to
learn mode.
•Now transmit with the device you want to pair the lamp with – press the button on WRL-KEY.
•The lamp receiver captures the signal, stores its code in memory and this is confirmed when the lamp flashes three times.
The learn mode is then automatically terminated
•If the device code is already saved in the memory, no action is performed.
•A new device isn't saved if the memory is full (the red LED on the top of the lamp flashes quickly, the learn mode is
ended) or the device with this code is already stored (the red LED on the top of the lamp goes out for approximately 1
second during learning).Post-warranty service
Post-Warranty Service
The post-warranty service is performed exclusively by the Czech manufacturer – FLAJZAR (the address is given at the end of these
instructions). We will apply our maximum effort to help you solve every problem in the shortest possible time.
Quick email contact in case of problems: obchod@flajzar.cz.
Declaration of Conformity
FLAJZAR, s.r.o. hereby declares that the device is in compliance with the essential requirements and other relevant regulations.
Recycling
Information for users for the disposal of electrical and electronic equipment. The symbol on the
product, its packaging or in the accompanying documentation means that the used electrical or
electronic products must not be disposed of together with municipal waste. In order to dispose of the
product properly, take it to the designated collection points where it will be accepted free of charge.
Batteries
Don't disassemble, short-circuit or throw the batteries into a fire. Don't recharge the batteries.
Manufacturer and Service
FLAJZAR, s.r.o.
Svatoplukova 1199
698 01 Veselí nad Moravou (Hodonín District)
phone: +420 776 586 866
email:
obchod@flajzar.cz
The full range of electronics for fishermen can be found at
WRL-KEY
www.flajzar.cz

Advertisement

loading
Need help?

Need help?

Do you have a question about the WRL-KEY and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for FLAJZAR WRL-KEY

  • Page 1 WRL-KEY WRL-KEY allows simple remote control of our wireless lamps WRL1 and WRL2. Lamps can be switched ON or OFF at any time by the WRL-KEY Specifications • Power: 3V battery CR2032 • Number of white LEDs: 3 • Dimensions: 59.2mm x 34.3mm x 12, Saving the Transmitter Code in the Lamp Memory (Pairing) •Press the button on the lamp and hold it for about 5 seconds until the red LED on the top flashes.