Page 1
Installation must be in accordance with local wiring rules and regulations. Installation must be in accordance with AS/NZS 3000. This product must be installed by a licenced Electrician. Venice Heated Towel Ladder Installation Instructions / Version 1.0 / 08-24 / Page 1 of 4...
Page 2
TECHNICAL DETAILS This product is manufactured to International Standards: WIRING INSTRUCTIONS IEC335-1:1991 IEC60335-2-43, 1995 Green/yellow: Earth AS/NZS3350.1.2002 Blue: Neutral Brown: Phase (power) IP Rating is IP55. SAFETY WARNINGS • A qualified Electrician must install this appliance in accordance • If the power cord is damaged, the complete appliance must be with local wiring regulations and this Instruction Manual.
Page 3
Risk of personal injury. Take safety precautions when installing electrical CAUTION appliances. Be sure to use proper tools and always wear personal safety devices for your protection. INSTALLATION STEPS This method of connection will allow you to completely conceal the cable for your towel rail. All components required to complete this installation are included in the package.
Page 4
WARRANTY We provide the following warranty for products purchased in Australia or New Zealand from authorised Oliveri resellers for use in domestic residential (indoor) or commercial (indoor) installations (Products). Commercial installations include are all non-residential installations including hotels, motels, gyms, clubs, factories, schools, hospitals, restaurants and aged care facilities. This warranty is in addition to our responsibility to customers under all other statutory and regulatory requirements.
Need help?
Do you have a question about the Venice and is the answer not in the manual?
Questions and answers