Contender GRN013 User Manual

Gas griddle

Advertisement

GAS GRIDDLE
USER MANUAL
SKU Code
Product Dimensions
GRN013
70 x 50 x 23
GRN014
71 x 50 x 23
GHN017
103 x 56 x 30
MODELS
Net Weight
32
32
48
Power
14 KW
14 KW
21 KW

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GRN013 and is the answer not in the manual?

Questions and answers

Summary of Contents for Contender GRN013

  • Page 1 GAS GRIDDLE USER MANUAL MODELS SKU Code Product Dimensions Net Weight Power GRN013 70 x 50 x 23 14 KW GRN014 71 x 50 x 23 14 KW GHN017 103 x 56 x 30 21 KW...
  • Page 2: Warning Signs

    1. PREFACE Please read the manual carefully before installing and using the machine, make sure that those who use the device read it. If you operate the machine without reading the manual, the device will be out of warranty. • The manual, which gives information about the installation, use and maintenance of the product you have purchased, should be read carefully.
  • Page 3 or authorized service. • In case of fire flame flashes for any reason in the area where the device is used, use a fire extinguisher by closing the gas valves and electrical switches without panicking. Never use water to extinguish the flame.
  • Page 4: Installation Of The Device

    If you smell gas: • First of all, be calm; don’t panic. • Close the gas tap of the device. • Extinguish burning materials (candles, gas lamps, etc.) immediately. • Open doors and windows to ventilate. • Do not try to burn any device. •...
  • Page 5: Control Panel Of The Device

    connection in accordance with the rules determined by the local energy distribution company in the country where the device is used. • Attention; The maximum gas pressure that can be applied while the device is operating is 50 mbar. • There is a risk of gas leakage at pressures above 50 mbar.
  • Page 6: Use Of The Device

    7. USE OF THE DEVICE Ignition of the pilot: In order for the gas to reach the pilot, the valve (B) must be brought to the pilot position (*) and kept pressed, after waiting for as long as necessary (the time elapsed until the air in the gas installation is removed and gas output is provided for the first time), the lighter (A) must be pressed in order to ignite.
  • Page 7: Warranty Conditions

    8. CLEANING • Before using the device for the first time, the entire outer surface, oil channel, and oil pot drawer should be cleaned with a thoroughly wrung cloth moistened with warm soapy water, starting from the sheet metal of the cooking surface. •...
  • Page 8 RG Distributors Ltd TA eCatering Unit 7, Spring Road, Jade Business Park Seaham, SR7 9DR 0333 358 3678 sales@ecatering.co.uk www.ecatering.co.uk...

This manual is also suitable for:

Grn014Ghn017

Table of Contents