Leaf&Bean G0000041 Instruction Manual

One Hand Smart Coffee Grinder
G0000041
Instruction Manual
Thank you for choosing the Leaf & Bean One
Hand Smart Coffee Grinder. To ensure proper
operation and to maintain the lifespan of
your device, please read these instructions
carefully before use.
Product Overview
Nut
Washer
Gateways
to hopper
16 settings
Lug
Rotor
Conical burr ceramic grinder
Important Safety Precautions
• For roasted coffee beans and household
use only.
Crank
Threaded shaft
Rim to open/close
gateways to hopper
Hopper
Adjusting ring
Black ring
Clear cup
Rubber
suction base
Stator
Assembly Instructions
push
3. Unscrew the nut and take out the white
washer from threaded shaft.
Attach the crank to the threaded shaft,
making sure that the hexagonal shape on
the crank fits into the hexagonal hole at the
end of the threaded shaft.
Replace the white washer and then attach
the nut. Screw the nut until tight.
1. Place the rubber
suction base on
countertop.Insert
the grinder in rubber
suction base.
2. Hold the grinder over
the top of rubber base
and push downwards
until grinder cannot
go any further. The
rubber suction base
will not attach to
countertops with
rough and grainy
textured surfaces.
4. The grinder is ready
for pouring in coffee
beans.Simply twist
the black hopper rim
in either direction for
the hopper gateways
to open.