Richter 7.89000 Assembly Instructions

ASSEMBLY INSTRUCTIONS
General information
A Surfacing requirements
This piece of equipment is intended for chil-
dren to play with, rather than on, and there-
fore has no intended body support. No free
height of fall is thereby stipulated.
B Foundations
No concrete foundations required.
Special information
Certified by TÜV Product Service GmbH in
compliance with EN 1176.
Please do not alter any parts of the equipment
or the construction itself since this may affect the
safety standards and your guarantee.
We reserve the right to make technical alterations!
For further information please call your local agent.
As delivery arrives on a pallet, check parts for damage caused in transit and
inform forwarder immediately.
Take care when removing retaining straps. At least two or if possible three
people needed for assembly.
RICHTER SPIELGERÄTE GMBH · D-83112 FRASDORF · PHONE +49-8052/17980 · FAX 4180
· ASSEMBLY INSTRUCTIONS · ASSEMBLY
Table Tennis Table
of acrylic composite
Order No. 7.89000
Components
Number of parts: 1
Pallet:
6 table supports with 4 galvanized steel straps
2 table top halves
fastening material
optionally:
1 aluminium net with 2 net brackets
4 aluminium tie rods
Weight with the pallet:
Heaviest single part:
INSTRUCTIONS
approx. 415 kg
approx. 130 kg
Page 1