Download Print this page

Share Technology BCD Operating Instructions Manual

Electric hoist winch

Advertisement

Quick Links

HEIBEI XIONGAN SHARE TECHNOLOGY CO., LTD.

Advertisement

loading
Need help?

Need help?

Do you have a question about the BCD and is the answer not in the manual?

Questions and answers

Summary of Contents for Share Technology BCD

  • Page 1 HEIBEI XIONGAN SHARE TECHNOLOGY CO., LTD.
  • Page 2 Make handling easier! Thank you for choosing our company's products, and hope it can serve you safely and efficiently. 1. Introduction Hoists currently on the market have the following problems: The structure is bulky, takes up a lot of space when used, the transportation cost is high, the installation is laborious, the mechanical transmission efficiency is low, the solid grease is lubricated, the gear noise is loud, and the wear is fast.
  • Page 3 Make handling easier! Technical Data Lifting Lifting Wire Rope Voltage Motor Capacity Model Usage Speed Height Diameter weight (kw) (kg) (m/min) (mm) (mm) (kg) Single Rope 380V/50HZ 1-100 300-600 Double Rope 380V/50HZ 1-100 Single Rope 220V/50HZ 1-100 300-600 Double Rope 220V/50HZ 1-100 Single Rope...
  • Page 4 Make handling easier! 1. Before using the hoist, please read and understand the operation manual of this product carefully. The installation position of the hoist must be selected in a place that meets the needs and is easy to operate. Regularly check whether the installation of the hoist is firm. 2.
  • Page 5: Troubleshooting

    Make handling easier! 15. When the hoist is working, please do not work under and around the hoist. 16. Please use the fixed accessories provided with the hoist, otherwise it may put you in an unsafe state. 17. Do not modify or weld the parts of the hoist at will, otherwise it will reduce the safety of the hoist and put you in an unsafe state.
  • Page 6 Make handling easier! Fault condition Cause of fault Remedy the power line Check voltage across power wires Check fuses and phases of power three The motor cannot start check the voltage phases of the stator is when it is unloaded Check the spring and shaft hole for cut off jamming...
  • Page 7 Make handling easier! the wire rope drum is in a horizontal state and must be firm and reliable. Do not place the machine in a humid or acidic place. The access power supply must have a reliable ground wire and leakage and overload protection devices. 6.

This manual is also suitable for:

Bcd 300-600Bcd 300-700Bcd 400-800Bcd 500-1000Bcd 600-1200Bcd 750-1500 ... Show all