Advertisement
Table of Contents
- 1 Important Notes
- 2 Features
- 3 Rear Panel Features
- 4 Manual Contents
- 5 Controls Identification
- 6 Operating Instructions
- 7 Liquid Crystal Display Panel
- 8 Tuner
- 9 CD Player
- 10 Auxiliary Input
- 11 Setting the Clock
- 12 Using the Audio Adjust Button
- 13 Setting the Alarm
- 14 Wiring Color Code
- 15 Installation
- 16 Specifications
- Download this manual
Advertisement
Table of Contents
Summary of Contents for Voyager AWM900S
- Page 1 AWM900S High Power AM/FM/CD Player Owner’s Manual Designed Specifically for the Van and RV lndustries...
- Page 2 Thank you for your purchase of the AWM900S. It is designed to give you good value and many hours of listening enjoyment. Please read this manual carefully, as it should be able to answer many of your questions about the operation and features of this product.
- Page 3 Controls Identification: Controls Identification 1) Display Window 13) Speaker Selector 2) CD Play/Pause Button 14) Volume Up Control Button 3) Band(AM/FM) Button 15) Volume Down Control Button 4) AUX Selector Button 16) Time/Frequency Selector Button 5) Alarm Set Button 17) Preset EQ Button (Rock, Pop, 6) Alarm On/Off Buttons Classic) 7) CD Eject Button...
- Page 4 Operating Instructions: NOTE: Number in parenthesis (#) corresponds with “Control Identification” on page 3. LIQUID CRYSTAL DISPLAY PANEL The liquid crystal display (LCD) panel displays the frequency, time and activated functions. Note: It is characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they will take longer to illuminate than under normal conditions.
- Page 5 AUXILIARY INPUT 1) Push Power Switch (10) “On”. 2) Using the source Selectors (4), choose the button labeled “AUX”. 3) If there is an external source (example: CD shuttle) connected to the Auxiliary Input Jacks (24) on the rear of the radio, then you can listen to your external source through the system. SETTING THE CLOCK 1) Push Power Switch (10) “On”.
- Page 6 Wiring Color Code: WIRING COLOR CODE FOR AWM-900S COLOR FUNCTION ORANGE/WHITE STRIPE +12VDC IGNITION POWER GREEN/WHITE STRIPE +12VDC BATTERY POWER BLACK/WHITE STRIPE POWER GROUND (-12VDC) WHITE LEFT (A) SPEAKER (+) VIOLET LEFT (A) SPEAKER (-) BLUE RIGHT (A) SPEAKER (+) LIGHT GREEN RIGHT (A) SPEAKER (-) LEFT (B) SPEAKER (+)
-
Page 7: Specifications
Installation: 1) Cut a mounting hole in the desired location using mounting hole diagram (below) and use the four 3x20min self tapping screws provided to mount the unit. 2) Route power, speaker and antenna cables through hole and connect to unit as outlined in the Wiring Color Code diagram on the previous page. - Page 8 WARRANTY 90 DAY / 12 MONTH LIMITED WARRANTY AUDIOVOX SPECIALIZED APPLICATIONS, LLC (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for...