Parts Description Top Cover Knob Fan Blade Body Control Panel Humidity Indicator Filter Float Inlet Tank Base Float Assembly Accessory List Manual Power Adaptor...
Page 3
How to Add Water WATER 1. Take the body apart as 2. Add water to the tank shown and remove the as shown above. filter. Also remove the bag that covers the filter. GROOVE BODY 3. After adding water, put the body back together, making sure the grooves snap back into place.
Page 4
Set-Up Time Water SLEEP Comfort Turbo Smart Mode Timer Power 1. To turn the power on to the unit, press the Power button. The lights will come on. Press the power button again to turn the unit off and the lights will go out. 2.
Button Functions To turn the power on to the unit, press the Power button. The lights will come on. Press the power button again to turn the unit off and the lights Power will go out. After pressing the power button, the humidity light will come on and the unit will automatically be in comfort mode.
Page 6
Caution To ensure safety, the product complies with all applicable standards and regulations (low voltage, electromagnetic compatibility, environmental directives, etc.). 1. The machine is not suitable for use by children. Do not allow children to play with this product. 2. Keep this product out of the reach of children. 3.
Important Reminders 1. It is recommended to use purified water for humidification. 2. Do not use damaged or aged adapters. Do not replace the power cable without authorization. If the power cable is damaged, it must be replaced by the manufacturer, other maintenance departments or professionals in similar departments to avoid danger.
Page 8
Cleaning Cleaning the Filter 1. Turn the unit off 2. Soak the filter in tap and unplug it. Take water for 1 hour. the body apart and remove the filter. 3. Clean the filter with slow running water from the faucet. Drain the excess water from the filter and return it to the tank.
Maintenance and Cleaning Cleaning the Outlet and Fan 1. Remove the screws at the back of the air outlet net with a screwdriver. Pull the air outlet net up and remove it. 2. Rotate the knob counterclockwise and you will be able to remove the fan.
Page 10
Maintenance and Cleaning Cleaning the Float and the Float Assembly 1. Rotate the float assembly 2. Remove the float counterclockwise. holder and bottle. 3. Wash the float bottle and 4. Put the floating bottle float holder under the support on the floating water tap.
Page 11
Maintenance and Cleaning Fuselage Cleaning/Descaling NOTE: Always unplug the adapter before maintenance/descaling. 1. The exterior of the 2. The main component is machine can be cleaned clean and can be wiped directly with a clean soft directly with a clean soft wet cloth.
WARRANTY: The EdenPURE Mist Free Humidifier comes with a ONE-YEAR LIMITED COMPONENT WARRANTY. If your unit does not appear to be working properly, please contact our service center by calling 1-800-225-6595. Prior to your call, we encourage you to visit our service related website: www.edenpuresupport.com...
Need help?
Do you have a question about the A6073 and is the answer not in the manual?
Questions and answers