Audiovox ACC56M Owner's Manual And Installation Manual

Advertisement

Quick Links

OWNER'S MANUAL
AND
INSTALLATION GUIDE
ACC56M
10-DISC CD CHANGER
Visit us at www.asaelectronics.com to see our full line of mobile audio and video products.
MADE IN CHINA

Advertisement

Table of Contents
loading

Summary of Contents for Audiovox ACC56M

  • Page 1 OWNER’S MANUAL INSTALLATION GUIDE ACC56M 10-DISC CD CHANGER Visit us at www.asaelectronics.com to see our full line of mobile audio and video products. MADE IN CHINA...
  • Page 2 I N T R O D U C T I O N Congratulations on your purchase of the AQUATRONICS ACC56M REMOTE-CONTROL 10-DISC CD CHANGER. This system allows you to easily upgrade your existing audio system to include a quality CD entertainment function.
  • Page 3: Packing List

    Guide 5. °‹ This unit cannot be installed on its side, end, or upside down. Installation in such positions will cause malfunctioning of the mechanism. OWNER’S MANUAL INSTALLATION GUIDE ACC56M 10-DISC CD CHANGER 1pc. 1pc. 1pc.
  • Page 4 WHERE TO INSTALL THE CHANGER I N S T A L L A T I O N The ACC56M changer is designed for horizontal (flat), vertical (upright) or 45-degree A few of the many mounting possibilities are shown below. The following precautions must mounting.
  • Page 5 PROCEDURE FOR VERTICAL INSTALLATION PROCEDURE FOR HORIZONTAL INSTALLATION N O T E : If the anti-vibration spring position has been changed and verified for vertical mounting (as shown on page 6), start with step 2. £A Attach bracket (L) and bracket (R) to each side of the unit,using the hexagonal bolts with washer base (M5 x 10).
  • Page 6 OVERALL WIRING VIEW This page is provided to give you a quick look at the entire wiring of the ACC56M. Use it to N O T E : If the anti-vibration spring position has been changed and verified for 45°£a n g l e plan your wire routing paths and possible connection points.
  • Page 7: Hints For Correct And Safe Operation

    HINTS FOR CORRECT AND SAFE OPERATION HANDLING THE DISCS This CD Changer is designed to be operated only on 12 volt DC negative ground systems. Dirt, dust, scratches and warpage cause sound skips during playback and a deterioration of The unit cannot be used on 24 volt or positive ground systems. sound quality.
  • Page 8 USE OF THE CD MAGAZINE Loading The Magazine Into The Changer Loading Disc Into The Magazine Fig. 1 Completely slide the door on the changer to the This CD Changer uses a specially-designed maga Fig. 4 right as shown in Figure 4. Making sure the top of zine to hold up to 10 compact discs.
  • Page 9: Specifications

    Mounting angle adjustment is not to the correct position as per the correct. installation instructions. Radio has not been initialized Press the RESET button on the face Radio will not switch with the ACC56M attached of the radio. to CDC mode...

Table of Contents