Macally ViewStand User Manual

EN
Thank you for purchasing the Macally
ViewStand. The ViewStand is an elegantly
designed stand for your iPad. The ViewStand
is almost entirely made of aluminium to com-
plement your iPad in style.The ViewStand can
be used in two different positions to give you a
better viewing and typing comfort.
Package contents
ViewStand, plastic support (part A and B),
screws, user guide
Basic hardware
• ViewStand
• Plastic support Part A
and
• Plastic support Part B
• Screws
Instructions
The plastic support is included to prevent the
product from accidentally tipping over. Please
follow the instructions below (see illustrations)
to install the plastic support:
1. Slide the plastic support part A in the hole
of the ViewStand and push it down until it
clicks in the ViewStand.
2. Turn the ViewStand around, and on the
back, align the plastic support part B with
the plastic support part A.
USER GUIDE
A
B
ViewStand
A
B
3. After alignment, slide the plastic support
part B forward, until it clicks in the plastic
ViewStand
support part A and secure the two parts
with screws.
How to use the ViewStand
1. To use your ViewStand in upright position,
you may insert the iPad into the ViewStand
in landscape or portrait mode. Simply align
the iPad with the ViewStand, slide it in
downward, and seat your iPad securely.
2. To use your ViewStand for typing and
browsing in landscape mode, simply align
the iPad with the ViewStand and slide-in
upward.
3. To use your ViewStand for typing and
browsing in portrait mode, first remove the
plastic supports (part a & part b), and lay
the iPad on top of the the ViewStand.
1